Features: ` True Dual-Ported memory cells which allow simultaneous access of the same memory location` High-speed access Industrial: 35ns (max.) Commercial: 15/20/25/35/55ns (max.)` Low-power operation IDT70V27S Active: 500mW (typ.) Standby: 3.3mW (typ.) IDT70V27L Active: 500mW (typ.) Standby:...
IDT70V27L: Features: ` True Dual-Ported memory cells which allow simultaneous access of the same memory location` High-speed access Industrial: 35ns (max.) Commercial: 15/20/25/35/55ns (max.)` Low-power oper...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Rating |
Commercial & Industrial |
Unit |
VTERM(2) | Terminal Voltage with Respect to GND |
-0.5 to +4.6 |
V |
TBIAS | Temperature Under Bias |
55 to +125 |
|
TSTG | Storage Temperature |
65 to +150 |
|
IOUT | DC Output Current |
50 |
mA |
The IDT70V27L is a high-speed 32K x 16 Dual-Port Static RAM, designed to be used as a stand-alone 512K-bit Dual-Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 32-bit and wider word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach in 32-bit or wider memory system applications results in full-speed, error-free operation without the need for additional discrete logic.
The IDT70V27L provides two independent ports with separate control, address, and I/O pins that permit independent, asynchronous access for reads or writes to any location in memory. An automatic power down feature controlled by the chip enables (CE0 and CE1) permits the on-chip circuitry of each port to enter a very low standby power mode.
Fabricated using IDT's CMOS high-performance technology, these devices typically operate on only 500mW of power. The IDT70V27L is packaged in a 100-pin Thin Quad Flatpack (TQFP), a 108-pin ceramic Pin Grid Array (PGA), and a 144-pin Fine Pitch BGA (fp BGA).