Purchase IDT74FCT2245AT, In-stock IDT74FCT2245AT From SeekIC.
Part Number: IDT74FCT2245AT
Description: The IDT octal bidirectional transceivers are built using an advanced dual metal CMOS technology. The F...
- Table of contents:
IDT74FCT2245AT
-
Suppliers
DataSheet
General Description
IDT74FCT2245AT General Description
The IDT octal bidirectional transceivers are built using an advanced dual metal CMOS technology. The FCT2245T is designed for asynchronous two-way communication between data buses. The transmit/receive (T/R) input determines the direction of data flow through the bidirectional transceiver. Transmit (active high) enables data from A ports to B ports, and receive (active low) from B ports to A ports. The output enable (OE) input, when high, disables both A and B ports by placing them in high Z condition.
The FCT2245T has balanced drive outputs with current limiting resistors. This offers low ground bounce, minimal undershoot and controlled output fall times- reducing the need for external series terminating resistors. The FCT2245T parts are plug-in replacements for FCT245T parts.
IDT74FCT2245AT Maximum Ratings
|
Symbol |
Description |
Max |
Unit |
|
VTERM(2) |
Terminal Voltage with Respect to GND |
0.5 to +7 |
V |
|
VTERM(3) |
Terminal Voltage with Respect to GND |
0.5 to VCC+0.5 |
V |
|
TSTG |
Storage Temperature |
65 to +150 |
°C |
|
IOUT |
DC Output Current |
60 to +120 |
mA |
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed Vcc by +0.5V unless otherwise noted.
2. Inputs and Vcc terminals only.
3. Output and I/O terminals only.
IDT74FCT2245AT Features
• A and C grades
• Low input and output leakage 1A (max.)
• CMOS power levels
• True TTL input and output compatibility: VOH = 3.3V (typ.) VOL = 0.3V (typ.)
• Meets or exceeds JEDEC standard 18 specifications
• Resistor outputs -15mA IOH, 12mA IOL
• Reduced system switching noise
• Available in SOIC, QSOP, and TSSOP packages
• Low input and output leakage 1A (max.)
• CMOS power levels
• True TTL input and output compatibility: VOH = 3.3V (typ.) VOL = 0.3V (typ.)
• Meets or exceeds JEDEC standard 18 specifications
• Resistor outputs -15mA IOH, 12mA IOL
• Reduced system switching noise
• Available in SOIC, QSOP, and TSSOP packages
IDT74FCT2245AT Connection Diagram
IDT74FCT2245AT
PDF/DataSheet Download
- Datasheet: IDT74FCT2245AT
- File Size: 71201 KB
- Manufacturer: IDT
- Click here to Download
- ·IDT 79R3081
- IDT
- RISController?
- 914564 KB
- ·IDT 79R3081E
- IDT
- RISController?
- 914564 KB
- ·IDT 79RV3081
- IDT
- RISController?
- 914564 KB
- ·IDT 79RV3081E
- IDT
- RISController?
- 914564 KB
- ·IDT RC5000
- IDT
- MULTI-ISSUE 64-BIT MICROPROCESSOR
- 470729 KB
- ·IDT2305
- IDT [Integrated Device Technology]
- 3.3V ZERO DELAY CLOCK BUFFER
- 135648 KB
- ·IDT2305-1
- IDT [Integrated Device Technology]
- 3.3V ZERO DELAY CLOCK BUFFER
- 135648 KB
- ·IDT2305-1DC
- IDT [Integrated Device Technology]
- 3.3V ZERO DELAY CLOCK BUFFER
- 135648 KB
IDT74FCT2245AT Relative Products
IDT74FCT2244T
The IDT octal buffer/line drivers are built using an advanced dual metal CMOS technology. The FCT240T/FCT2240T and FCT244T/FCT2244T are designed to be employed as memory and address drivers, clock drivers and bus- oriented transmitter/receivers which provide...
IDT74FCT2244CTSOG8
IC BUFF DVR OCTAL N-INV 20SOIC
IDT74FCT2244CTSOG
IC BUFF DVR OCTAL N-INV 20SOIC
IDT74FCT2244CTQG8
IC BUFF DVR OCTAL N-INV 20QSOP
IDT74FCT2244CTQG
IC BUFF DVR OCTAL N-INV 20QSOP
IDT74FCT2244CT
The IDT octal buffer/line drivers are built using an advanced dual metal CMOS technology. The FCT240T/FCT2240T and FCT244T/FCT2244T are designed to be employed as memory and address drivers, clock drivers and bus- oriented transmitter/receivers which provide...
Hotspot Suppliers Product
UPJ1E471MPD
Price: 0.13-0.4 USD
aluminum electrolytic capacitor, 470UF, 25V, 20%, RADIAL
P89LPC936FDH
Price: 1.7-50 USD
8-bit microcontroller, two-clock 80C51 core, 3 V byte-erasable flash, -0.5 to +5.5 V
KM62256DLGI-7
Price: 0.62-0.86 USD
32Kx8 bit, low power, CMOS static RAM, DIP, TTL Compatible, 2V, Three state output
LM324DT
Price: 0.1-1 USD
Low Power, Quad Operational Amplifier, SO, 1.3MHz
CY7C68013A128AXC
Price: 4.5-6.5 USD
USB Microcontroller, QFP, 2.0-USB-IF
1469028-1
Price: 150-200 USD
1469028-1, DIP, Hard Metric Connector
TDA16888
Price: 0.8-0.9 USD
Power Control ICs, P-DIP-20-5, High Performance, PFC and PWM section, 90 V to 270V
SN74HC245NSR
Price: 0.1-1 USD
octal bus transceiver, SOP-20, 2V to 6V, 3-state outputs, Power Consumption 80-μA
MG50Q6ES40
Price: 90-130 USD
N channel IGBT, high power switching, motor control applications, collector emitter voltage 1200V
HD74HC138RPL
Price: 0.1-1 USD
3-to-8-line, Decoder/Demultiplexer, SOP
2MBI100NC-120
Price: 15-25 USD
IGBT module, 1200 V Collector-Emitter Voltage, Low Saturation Voltage, 100 A Continuous
MB85RC16VPNF-G-JNERE1
Price: 0.6-0.62 USD
16K-bits FRAM LSI with serial interface (I2C), 3.0 to 5.5V, 400 kHz, Low power consumption, 5A
