Purchase IDTQS74FCT2841CT, In-stock IDTQS74FCT2841CT From SeekIC.
Part Number: IDTQS74FCT2841CT
Description: The IDTQS74FCT2841T is a 10-bit high-speed CMOS TTL-compatible buffered latch with 3-state outputs, wi...
- Table of contents:
IDTQS74FCT2841CT
-
Suppliers
DataSheet
General Description
IDTQS74FCT2841CT General Description
The IDTQS74FCT2841T is a 10-bit high-speed CMOS TTL-compatible buffered latch with 3-state outputs, with a 25 resister that is useful for driving transmission lines and reducing system noise. The 2841 eliminates the need for external series resistors in high speed systems and can replace the 841 series to reduce noise in an existing design. All inputs have clamp diodes for undershoot noise suppression. All outputs have ground bounce suppression. Outputs will not load an active bus when Vcc is removed from the device.
IDTQS74FCT2841CT Maximum Ratings
|
Symbol |
Description |
Max |
Unit |
|
VTERM |
Terminal Voltage with Respect to GND |
0.5 to +7 |
V |
|
TSTG |
Storage Temperature |
65 to +150 |
°C |
|
IOUT |
DC Output Current Max Current Sink/Pin |
+120 |
mA |
|
IIK |
Input Diode Current, VIN < 0 |
-20 |
mA |
|
IOK |
DC Output Current, VOUT < 0 |
-50 |
mA |
NOTE:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
IDTQS74FCT2841CT Features
• CMOS power levels: <7.5mW static
• Undershoot clamp diodes on all outputs
• True TTL input and output compatibility
• Ground bounce controlled outputs
• Reduced output swing of 0 to 3.5V
• Built-in 25 series resistor outputs reduce reflection and other system noise
• A, B, and C speed grades with 5.5ns tPD for C
• IOL = 12mA
• Available in SOIC and QSOP packages
• Undershoot clamp diodes on all outputs
• True TTL input and output compatibility
• Ground bounce controlled outputs
• Reduced output swing of 0 to 3.5V
• Built-in 25 series resistor outputs reduce reflection and other system noise
• A, B, and C speed grades with 5.5ns tPD for C
• IOL = 12mA
• Available in SOIC and QSOP packages
IDTQS74FCT2841CT Connection Diagram
IDTQS74FCT2841CT
PDF/DataSheet Download
- Datasheet: IDTQS74FCT2841CT
- File Size: 57315 KB
- Manufacturer: IDT
- Click here to Download
- ·IDT 79R3081
- IDT
- RISController?
- 914564 KB
- ·IDT 79R3081E
- IDT
- RISController?
- 914564 KB
- ·IDT 79RV3081
- IDT
- RISController?
- 914564 KB
- ·IDT 79RV3081E
- IDT
- RISController?
- 914564 KB
- ·IDT RC5000
- IDT
- MULTI-ISSUE 64-BIT MICROPROCESSOR
- 470729 KB
- ·IDT2305
- IDT [Integrated Device Technology]
- 3.3V ZERO DELAY CLOCK BUFFER
- 135648 KB
- ·IDT2305-1
- IDT [Integrated Device Technology]
- 3.3V ZERO DELAY CLOCK BUFFER
- 135648 KB
- ·IDT2305-1DC
- IDT [Integrated Device Technology]
- 3.3V ZERO DELAY CLOCK BUFFER
- 135648 KB
IDTQS74FCT2841CT Relative Products
IDTQS74FCT2841BT
The IDTQS74FCT2841BT is a 10-bit high-speed CMOS TTL-compatible buffered latch with 3-state outputs, with a 25 resister that is useful for driving transmission lines and reducing system noise. The 2841 eliminates the need for external series resistors in hig...
IDTQS74FCT2841AT
The IDTQS74FCT2841AT is a 10-bit high-speed CMOS TTL-compatible buffered latch with 3-state outputs, with a 25 resister that is useful for driving transmission lines and reducing system noise. The 2841 eliminates the need for external series resistors in hig...
IDTQS74FCT2828BT
The IDTQS74FCT2828BT is a 10-bit buffer with 3-state outputs and a 25 resistor, useful for driving transmission lines and reducing system noise. The 2828T series parts can replace the 828T series to reduce noise in an existing design. All inputs have clamp d...
IDTQS74FCT2828AT
The IDTQS74FCT2828AT is a 10-bit buffer with 3-state outputs and a 25 resistor, useful for driving transmission lines and reducing system noise. The 2828T series parts can replace the 828T series to reduce noise in an existing design. All inputs have clamp d...
IDTQS74FCT2827CT
The IDTQS74FCT2827CT is a 10-bit buffer with 3-state outputs and a25Ω resistor, useful for driving transmission lines and reducing systemnoise. The 2827T series parts can replace the 827T series to reduce noisein an existing design. All inputs have cla...
IDTQS74FCT2827BT
The IDTQS74FCT2827BT is a 10-bit buffer with 3-state outputs and a25Ω resistor, useful for driving transmission lines and reducing systemnoise. The 2827T series parts can replace the 827T series to reduce noisein an existing design. All inputs have cla...
Hotspot Suppliers Product
MRF316
Price: 18-20 USD
BROADBAND RF POWER TRANSISTOR NPN SILICON MRF316
PGA205AU
Price: 1-10 USD
low cost, general purpose, programmable-gain instrumentation amplifier, SOL-16, ±18V, 5.2ma typ
G86-770-A2
Price: 47.3-48.5 USD
laptop VGA chipset, BGA, 256 bit, 600 MHz, 22.4 GB/s, G86-770-A2, NVIDIA Corporation
74LS132
Price: 0.14-0.25 USD
schottky, 5V, 0.4mA
6MBI100FC-060
Price: 35-42 USD
low saturation voltage, voltage drive, variety of power capacity series, IGBT module, 600V
QM100HY-2H
Price: 30-35 USD
Mitsubishi transistor module, 100A Collector current, 1000V Collector-emitter voltage
V36ZA80P
Price: 1.4-5 USD
VARISTOR 36V 160J 20MM RADL ZA - V36ZA80P
TEESVA0J476M8R
Price: 0.5-0.8 USD
47uf, 6.3 V,SMD, capacitor
BFG591
Price: 0.1-0.4 USD
15V, 7GHz, SOT-223, NPN silicon planar epitaxial transistor, 2W, RoHS Compliant
MAX310CPE+
Price: 2.2-2.5 USD
CMOS monolithic analog multiplexer, 36V, 750mW, ±30mA, latch-up proof construction, wide supply ra...
MHPA18010N
Price: 30-70 USD
MHPA18010N CDMA Band RF Linear LDMOS Amplifier
TOP246YN
Price: 0.5-0.77 USD
Extended Power, Design Flexible, EcoSmart, Integrated Off-line Switcher, TO-220
