Purchase IL2901, In-stock IL2901 From SeekIC.


Part Number: IL2901
Description: The IL2901 consists of four independent precision voltage comparators with an offset voltage specifica...


Description: The IL2901 consists of four independent precision voltage comparators with an offset voltage specifica...
The IL2901 consists of four independent precision voltage comparators with an offset voltage specification as low as 2.0 mV max for four comparators which were designed specifically to operate from a single power supply over a wide range of voltages.
Application areas include limit comparators, simple analog to digital converters; pulse, square wave and time delay generators; wide range VCO; MOS clock timers; multivibrators and high voltage digital logic gates.
| Parameter | Symbol | Limits | Unit |
| Power Supply Voltages Single Supply Split Supplies |
VCC | 36 ±18 |
V |
| Input Differential Voltage Range | VIDR | 36 | V |
| Input Common Mode Voltage Range (1) | VICR | -0.3 to VCC | V |
| Output Short Circuit to Ground | ISC | Continuous | |
| Input Current, per pin (2) | IIN | 50 | mA |
| Lead Temperature, 1mm from Case for 10 Seconds | TL | 260 | |
| Power Dissipation @TA=25°C Plastic Package Derate above 25°C | Pd | 1.0 8.0 |
W mW/ |
| Junction Temperature Plastic Packages |
Tj | 150 | |
| Storage Temperature | Tstg | -55~+150 |
*Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions.
Notes:
1. Split Power Supplies.
2. VIN<-0.3V. This input current will only exist when voltage at any of the input leads is driven negative.
IL2
PDF/DataSheet Download








