High Linearity Optocouplers High Gain Wide Bandwidth Linear
IL300: High Linearity Optocouplers High Gain Wide Bandwidth Linear
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.5 - 2.01 / Piece
High Linearity Optocouplers High Gain Wide Bandwidth Linear
US $1.37 - 1.38 / Piece
High Linearity Optocouplers High Gain Wide Bandwidth Linear
Input Type : | AC/DC | Maximum Forward Diode Voltage : | 1.5 V |
Maximum Reverse Diode Voltage : | 5 V | Maximum Input Diode Current : | 60 mA |
Maximum Power Dissipation : | 210 mW | Maximum Operating Temperature : | + 100 C |
Minimum Operating Temperature : | - 55 C | Package / Case : | DIP-8 |
Packaging : | Tube |
Parameter | Test condition | Symbol | Value | Unit |
Power dissipation | Pdiss | 160 | mW | |
Derate linearly from 25 °C | 2.13 | mW/°C | ||
Forward current | IF | 60 | mA | |
Surge current (pulse width < 10 µs) | IPK | 250 | mA | |
Reverse voltage | VR | 5.0 | V | |
Thermal resistance | Rth | 470 | K/W | |
Junction temperature | Tj | 100 | °C |
The IL300 Linear Optocoupler consists of an AlGaAs IRLED irradiating an isolated feedback and an output PIN photodiode in a bifurcated arrangement. The feedback photodiode captures a percentage of the LED's flux and generates a control signal (IP1) that can be used to servo the LED drive current. This technique compensates for the LED's non-linear, time, and temperature characteristics. The output PIN photodiode of the IL300 produces an output signal (IP2) that is linearly related to the servo optical flux created by the LED.
The time and temperature stability of the input-output coupler gain (K3) is insured by using matched PIN photodiodes that accurately track the output flux of the LED.