Purchase IMP813L, In-stock IMP813L From SeekIC.
Package Cooled:DIP D/C:09+
Part Number: IMP813L
Package Cooled: DIP
D/C: 09+
Description: The IMP705/706/707/708 and IMP813L CMOS supervisor circuits monitor power-supply and battery voltage l...
- Table of contents:
IMP813L
-
Suppliers
DataSheet
General Description
IMP813L General Description
The IMP705/706/707/708 and IMP813L CMOS supervisor circuits monitor power-supply and battery voltage level, and µP/µC operation. Compared to pin-compatible devices offered by Maxim Integrated Products, IMP devices feature 60 percent lower maximum supply current.
The family offers several functional options. Each device generates a reset signal during power-up, power-down and during brownout conditions. A reset is generated when the supply drops below 4.65V (IMP705/707/813L) or 4.40V (IMP706/708). For 3V power supply applications, refer to the IMP705P/R/S/T data sheet. In addition, the IMP705/706/813L feature a 1.6 second watchdog timer. The IMP707/708 have both active-HIGH and active-LOW reset outputs but no watchdog function. The IMP813L has the same pin-out and functions as the IMP705 but has an active-HIGH reset output. A versatile power-fail circuit has a 1.25V threshold, useful in checking battery levels and non-5V supplies. All devices have a manual reset (MR ) input. The watchdog timer output will trigger a reset if connected to MR .
All devices are available in 8-pin DIP, SO and MicroSO packages.
IMP813L Maximum Ratings
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3V to 6.0V
All other inputs1 . . . . . . . . . . . . 0.3V to (VCC + 0.3V)
Input Current at VCC and GND . . . . . . . . . . . . . . 20mA
Output Current: All outputs . . . . . . . . . . . . . . . . . 20mA
Rate of Rise at VCC . . . . . . . . . . . . . . . . . . . . . 100V/µs
Plastic DIP Power Dissipation . . . . . . . . . . . . . 700 mW
(Derate 9 mW/°C above 70°C)
SO Power Dissipation . . . . . . . . . . . . . . . . . . . 470 mW
(Derate 5.9 mW/°C above 70°C)
MicroSO Power Dissipation . . . . . . . . . . . . . . . . 330mW
(Derate 4.1 mW/°C above 70°C)
IMP705E/706E/707E/708E/813LE . . . 40°C to 85°C
IMP706C/707C/708C/813LC . . . . . . . . 0°C to 70°C
Storage Temperature Range . . . . . . 65°C to 160°C
Lead Temperature Soldering(10 sec) . . . . . . . . 300°C
Note: 1. The input voltage limits on PFI and MR can be exceeded if the input current is less than 10mA.
These are stress ratings only and functional operation is not implied.
All other inputs1 . . . . . . . . . . . . 0.3V to (VCC + 0.3V)
Input Current at VCC and GND . . . . . . . . . . . . . . 20mA
Output Current: All outputs . . . . . . . . . . . . . . . . . 20mA
Rate of Rise at VCC . . . . . . . . . . . . . . . . . . . . . 100V/µs
Plastic DIP Power Dissipation . . . . . . . . . . . . . 700 mW
(Derate 9 mW/°C above 70°C)
SO Power Dissipation . . . . . . . . . . . . . . . . . . . 470 mW
(Derate 5.9 mW/°C above 70°C)
MicroSO Power Dissipation . . . . . . . . . . . . . . . . 330mW
(Derate 4.1 mW/°C above 70°C)
IMP705E/706E/707E/708E/813LE . . . 40°C to 85°C
IMP706C/707C/708C/813LC . . . . . . . . 0°C to 70°C
Storage Temperature Range . . . . . . 65°C to 160°C
Lead Temperature Soldering(10 sec) . . . . . . . . 300°C
Note: 1. The input voltage limits on PFI and MR can be exceeded if the input current is less than 10mA.
These are stress ratings only and functional operation is not implied.
IMP813L Features
`Improved replacements for the Maxim MAX705/6/7/8, MAX813L
140µA maximum supply current
60% improvement
`Precision power supply monitor
4.65V threshold (IMP705/707/813L)
4.40V threshold (IMP706/8)
`Debounced manual reset input
`Voltage monitor
1.25V threshold
Battery monitor/Auxiliary supply monitor
`Watchdog timer (IMP705/706/813L)
`200ms reset pulse width
`Active HIGH reset output (IMP707/708/813L)
`MicroSO package
140µA maximum supply current
60% improvement
`Precision power supply monitor
4.65V threshold (IMP705/707/813L)
4.40V threshold (IMP706/8)
`Debounced manual reset input
`Voltage monitor
1.25V threshold
Battery monitor/Auxiliary supply monitor
`Watchdog timer (IMP705/706/813L)
`200ms reset pulse width
`Active HIGH reset output (IMP707/708/813L)
`MicroSO package
IMP813L Typical Application
·Computers and embedded controllers
·Battery-operated systems
·Intelligent instruments
·Wireless communication systems
·PDAs and handheld equipment
·Battery-operated systems
·Intelligent instruments
·Wireless communication systems
·PDAs and handheld equipment
IMP813L Connection Diagram
IMP813L
PDF/DataSheet Download
- Datasheet: IMP813L
- File Size: 170483 KB
- Manufacturer: imp
- Click here to Download
- ·IMP11
- ROHM [Rohm]
- Switching diode
- 177280 KB
- ·IMP1117
- 279266 KB
- ·IMP1232
- IMP [IMP, Inc]
- 5V レP Power Suppl er Supply Monit y Monitor and or and Reset Cir eset Circuit
- 106894 KB
- ·IMP1232LP
- IMP [IMP, Inc]
- 5V レP Power Suppl er Supply Monit y Monitor and or and Reset Cir eset Circuit
- 106894 KB
- ·IMP1232LPCMA
- IMP [IMP, Inc]
- 5V レP Power Suppl er Supply Monit y Monitor and or and Reset Cir eset Circuit
- 106894 KB
- ·IMP1232LPEMA
- IMP [IMP, Inc]
- 5V レP Power Suppl er Supply Monit y Monitor and or and Reset Cir eset Circuit
- 106894 KB
- ·IMP1232LPN
- IMP [IMP, Inc]
- 5V レP Power Suppl er Supply Monit y Monitor and or and Reset Cir eset Circuit
- 106894 KB
- ·IMP1232LPS
- IMP [IMP, Inc]
- 5V レP Power Suppl er Supply Monit y Monitor and or and Reset Cir eset Circuit
- 106894 KB
IMP813L Relative Products
IMP813
The IMP813 is designed as the CMOS supervisor circuits monitor that generates a reset signal during power-up, power-down and during brownout conditio-ns. This device can be used in (1)computers and embedded controllers; (2)battery-operated systems; (3)intell...
IMP812
The IMP811/IMP812 are low-power supervisors designed to monitor voltage levels of 3.0V, 3.3V and 5.0V power supplies in low-power microprocessor (µP), microcontroller (µC) and digital systems. Each features a debounced manual reset input. The IMP...
IMP811
The IMP811/IMP812 are low-power supervisors designed to monitor voltage levels of 3.0V, 3.3V and 5.0V power supplies in low-power microprocessor (µP), microcontroller (µC) and digital systems. Each features a debounced manual reset input. The IMP...
IMP810
The IMP810 is designed as one kind of 3.0V, 3.3V and 5.0V power supply supervisor that is optimized for low-power microprocessor (P), microcontroller (C) and digital systems. This device can be used in (1)embedded controllers; (2)battery operated systems; (3...
IMP809
The IMP809/IMP810 are 3.0V, 3.3V and 5.0V power supply supervisor circuits optimized for low-power microprocessor (µP), microcontroller (µC) and digital systems. The IMP809/810 are improved drop-in replacements for the Maxim MAX809/810 and featur...
IMP805L
The IMP690A/IMP692A/IMP802L/IMP802M/IMP805L simplify power supply monitoring and control in microprocessor systems. Each circuit implements four functions: Reset control, watchdog monitoring, batterybackup switching and power-failure monitoring. In addition ...
Hotspot Suppliers Product
TT250N12KOF
Price: 150-170 USD
Netz-Thyristor-Modul Phase Control Thyristor Module TT250N12KOF
LC4064ZC75T100
Price: 8-9 USD
LC4064ZC75T100 - Lattice Semiconductor QFP
UPD17P149GT
Price: 2.5-3 USD
4 BIT SINGLE-CHIP MICROCONTRLLER
D3777CY
Price: 1-10 USD
sensor, DIP, 4MHz
218S6ECLA21FG
Price: 6.02-6.3 USD
218S6ECLA21FG, BGA, IC
AT29C010A-70P
Price: 0.7-2 USD
5-volt-only, PEROM, 1 Megabit, DIP-32
MS6265-10NC
Price: 0.1-50 USD
DIP, slow speed, 64K bit, static RAM, 100ns, 5V, Three state outputs, Automatic power-down
D1028UK
Price: 75-81 USD
DMOS RF FET, 438 W, ±20 V
MAX1487ESA+
Price: 0.01-1.5 USD
low-power transceivers, one driver, one receiver
MX29L3211MC-10
Price: 5.5-6 USD
Flash memory, SOP, -0.5V to Vcc+0.5V, Auto Erase, Auto Program Algorithms
PCI9052
Price: 9.5-12.5 USD
Interface/Controller, PQFP-160, PCI
SN74LS07DR
Price: 0.15-0.3 USD
hex buffers/driver, SOIC-14, Supply voltage 7 V, High Sink-Current Capability
