Features: ·Outputs Directly Interface to CMOS, NMOS, and TTL ·Operating Voltage Range: 2.0 to 6.0 V ·Low Input Current: 1.0 A· High Noise Immunity Characteristic of CMOS DevicesPinoutSpecifications Symbol Parameter Value Unit VCC DC Supply Voltage (Referenced to GND) -0.5 t...
IN74HC164: Features: ·Outputs Directly Interface to CMOS, NMOS, and TTL ·Operating Voltage Range: 2.0 to 6.0 V ·Low Input Current: 1.0 A· High Noise Immunity Characteristic of CMOS DevicesPinoutSpecifications ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter |
Value |
Unit |
VCC | DC Supply Voltage (Referenced to GND) |
-0.5 to +7.0 |
V |
VIN | DC Input Voltage (Referenced to GND) |
-1.5 to VCC +1.5 |
V |
VOUT | DC Output Voltage (Referenced to GND) |
-0.5 to VCC +0.5 |
V |
IIN | DC Input Current, per Pin |
±20 |
mA |
IOUT | DC Output Current, per Pin |
±25 |
mA |
ICC | DC Supply Current, VCC and GND Pins |
±50 |
mA |
PD | Power Dissipation in Still Air, Plastic IP+ SOIC Package+ |
750 500 |
mW |
Tstg | Storage Temperature |
-65 to +150 |
|
TL | Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) |
260 |
|
The IN74HC164A is identical in pinout to the LS/ALS164. The device inputs are compatible with standard CMOS tputs; with pullup resistors, they are compatible with LS/ALSTTL outputs.
The IN74HC164A is an 8-bit, serial-input to parallel-output shift register. Two serial data inputs, A1 and A2, are vided so that one input may be used as a data enable. Data is entered on each rising edge of the mclock. The active-low ous Reset overrides theClock and Serial Data inputs.