Instrumentation Amplifiers Low Noise Low- Distortion
INA217AIP: Instrumentation Amplifiers Low Noise Low- Distortion
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.03 - 1.6 / Piece
Current & Power Monitors & Regulators CRNT SHUNT MONITOR
Number of Channels : | 1 | Input Offset Voltage : | 250 uV |
Available Set Gain : | 80 dB | Maximum Input Resistance : | 60 MOhms |
Common Mode Rejection Ratio (Min) : | 100 dB | Operating Supply Voltage : | 36 V |
Supply Current : | 12 mA | Maximum Operating Temperature : | + 125 C |
Minimum Operating Temperature : | - 40 C | Package / Case : | PDIP-8 |
Packaging : | Tube |
The INA217AIP is a low-noise, low-distortion, monolithic instrumentation amplifier. It features wide supply voltage, excellent output voltage swing, and high output current drive making it an optimal candidate for use in high-level audio stages.
The features of INA217AIP can be summarized as:(1)low noise: 1.3nv/hz at 1khz; (2)low thd+n: 0.004% at 1khz, g = 100; (3)wide bandwidth: 800khz at g = 100; (4)wide supply range: ±4.5v to ±18v; (5)high cmr: > 100db; (6)gain set with external resistor; (7)dip-8 and sol-16 widebody packages.
The absolute maximum ratings of INA217AIP are:(1)Supply Voltage, V+ to V:±18V; (2)Signal Input Terminals:Voltage..(V)0.5V to (V+) + 0.5V,Current..10mA; (3)Output Short-Circuit:Continuous; (4)Operating Temperature:55°C to +125°C; (5)Storage Temperature:55°C to +150°C; (6)Junction Temperature:+150°C; (7)Lead Temperature (soldering, 10s):+300°C.
If you want to know more information such as the electrical characteristics about the INA217AIP, please download the datasheet in www.seekic.com or www.chinaicmart.com .
Technical/Catalog Information | INA217AIP |
Vendor | Texas Instruments |
Category | Integrated Circuits (ICs) |
Packaging | Tube |
Amplifier Type | Instrumentation |
Number of Circuits | 1 - Single |
Package / Case | 8-DIP (300 mil) |
Slew Rate | 15 V/s |
Gain Bandwidth Product | - |
Current - Supply | 10mA |
Current - Output / Channel | 60mA |
Voltage - Supply, Single/Dual (±) | 9 V ~ 36 V, ±4.5 V ~ 18 V |
Output Type | - |
-3db Bandwidth | 3.4MHz |
Current - Input Bias | 2A |
Operating Temperature | -40°C ~ 85°C |
Voltage - Input Offset | 50V |
Drawing Number | 296; 4040082; P; 8 |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | INA217AIP INA217AIP 296 13452 5 ND 296134525ND 296-13452-5 |