IPS6041SPBF

Maximum Operating Temperature :
Mounting Style : SMD/SMT
Supply Voltage - Min : 4 V
Packaging : Tube
Product : H-Bridge Drivers
Supply Voltage - Max : 5.5 V
Type : High Side
Supply Current : 10 mA
Package / Case : D2PAK-5
Maximum Power Dissipation : 2.5 W
Rise Time : 3 us
Fall Time : 3 us


Features:

Over temperature shutdown (with auto-restart)
Short circuit protection (current limit)
Reverse battery protection (turns On the MOSFET)
Full diagnostic capability (short circuit to battery)
Active clamp
Open load detection in On and Off state
Ground loss p
rotection
Logic ground isolated from power ground
ESD protection


Specifications

Symbol	Parameter	Min.	Max.	Units
Vout	Maximum output voltage	Vcc-35	Vcc+0.3
Voffset	Maximum logic ground to load ground offset	Vcc-35	Vcc+0.3
Vin	Maximum input voltage	-0.3	5.5
Vcc max.	Maximum Vcc voltage	-	36
Vcc cont.	Maximum continuous Vcc voltage	-	28
Iin max.	Maximum IN current	-3	10
Idg max.	Maximum diagnostic output current	-3	10
Vdg	Maximum diagnostic output voltage	-0.3	5.5
Pd	Maximum power dissipation (internally limited by thermal protection) Rth=100/W IPS6041G	-	1.25
	Rth=50°C/W IPS6041R 1"sqrt. footprint	-	2.5
ESD	Electrostatic discharge voltage (Human body) C=100pF, R=1500 Between In and Vcc	-	1500
	Other combinations	-	4000
	Electrostatic discharge voltage (Machine Model) C=200pF,R=0,L=10H Between In and Vcc	-	100
	Other combinations	-	500
Tj max.	Max. storage & operating temperature junction temperature	-40	150
Tsoldering	Soldering temperature (10 seconds)	-	300

Description

The IPS6041SPbF for use in a high side configuration. It features short circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is limited to the Ilim value. The current limitation is activated until the thermal protection acts. The over-temperature protection turns off the device if the junction temperature exceeds the Tshutdown value. It will automatically restart after the junction has cooled 7below the Tshutdown value. The reverse battery protection turns On the MOSFET. A diagnostic pin of the IPS6041SPbF provides different voltage levels for each fault condition. The double level shifter circuitry will allow large offsets between the logic and load ground.

Parameters:

Technical/Catalog Information	IPS6041SPBF
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Package / Case	D²Pak, TO-263 (4 leads + tab)
Mounting Type	Surface Mount
Type	High Side
Voltage - Supply	6 V ~ 28 V
On-State Resistance	110 mOhm
Current - Output / Channel	2.3A
Current - Peak Output	7A
Packaging	Tube
Input Type	Non-Inverting
Number of Outputs	1
Operating Temperature	-40°C ~ 150°C
Drawing Number	*
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	IPS6041SPBF IPS6041SPBF