Features: `User-friendly single-chip, single-message voice record & playback devices `Wide operating voltage: 2.4V to 5.5V `Push-button interface `Record is level-triggered`Playback is either edge- or level-triggered Selectable sampling frequency controlled by an external oscillator resisto...
ISD1600B: Features: `User-friendly single-chip, single-message voice record & playback devices `Wide operating voltage: 2.4V to 5.5V `Push-button interface `Record is level-triggered`Playback is either e...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
CONDITIONS [1] |
VALUES |
Junction temperature | 150 |
Storage temperature range | -65 to +150 |
Voltage applied to all pins | (VSS-0.3V) to (VDD+0.3V) |
Power supply voltage to ground potential | -0.3V to +7.0V |
CONDITIONS [1] | VALUES |
Junction temperature | 150 |
Storage temperature range | -65 to +150 |
Voltage applied to all pins | (VSS -0.3V) to (VDD +0.3V) |
Lead temperature (Soldering-10 sec) | 30 |
Power supply voltage to ground potential | -0.3V to +7.0V |
The Winbond® ISD1600B ChipCorder ® Series is a high quality, fully integrated, single-chip single message voice record and playback device ideally suited to a variety of electronic systems. The message duration is user selectable in ranges from 6.6 seconds to 40 seconds, depending on the specific device. The sampling frequency of each device can also be adjusted from 4 kHz to 12 kHz with an external resistor, giving the user greater flexibility in duration versus recording quality for each application. Operating voltage spans a range from 2.4 V to 5.5 V to ensure that the ISD1600B devices are optimized for a wide range of battery or line-powered applications.
The devices ISD1600B include an on-chip oscillator (with external resistor control), microphone preamplifier with Automatic Gain Control (AGC), anti-aliasing filter, Multi-Level Storage (MLS) array, smoothing filter, Pulse Width Modulation (PWM) Class D speaker driver, and current output. Voice signals can be fed into the chip through a differential microphone input for recording. The PWM output can directly drive a standard 8 speaker or a typical buzzer, while the separate singleended current output can drive an external amplifier.
Recordings are stored into the on-chip Flash memory cells, providing zero-power message storage. This unique glechip solution is made possible through Winbond!s patented Multi-Level Storage (MLS) technology. Audio data are stored directly in solid-state memory without digital compression, providing superior quality voice and music reproduction.
The ISD1600B Series also supports an optional "vAlert" (voiceAlert) feature that can be used as new message indicator. With vAlert, the IC strobes an external LED to indicate that a new message is present.