ISL6296

Features:

Challenge-response based authentication scheme using 32-bit challenge code and 8-bit authentication code.
Fast and flexible authentication process. Multi-pass authentication can be used to achieve the highest security level if necessary.
16x8 OTP ROM stores up to three sets of 32-bit host-selectable secrets with additional programmable memory for storage of up to 48 bits of ID code and/or pack information.
FlexiHash engine uses two sets of 32-bit secrets for authentication code generation.
Non-unique mapping of the secret key to an 8-bit authentication code maximizes hacking difficulty due to need for exhaustive key search (superior to SHA-1).
Supports 1-cell Li-Ion/Li-Poly and 3-cell series NiMH battery packs (2.6V ~ 4.8V operation), or powered by the XSD bus.
XSD single-wire host bus interface communicates with all 8250-compatible UART's or a single GPIO. Supports CRC on read data and transfer bit-rate up to 23kbps.
True "Zero Power" Sleep mode - automatically entered after a bus inactivity time-out period
5-pin SOT-23
-20 to +85 operating temperature range
Pb-Free Available (RoHS Compliant)

Application

Battery Pack Authentication
Printer Cartridges
Add-on Accessories
Other Non-Monetary Authentication Applications




Pinout






Specifications

Supply Voltage (VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5V
All Other Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . .-0.5 to VDD+0.5V
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7). . .4000V
Machine Model (Per EIAJ ED-4701 Method C-111). . . . . . . .400V
CDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1000V




Description

The ISL6296 is a highly cost-effective fixed-secret hash engine based on Intersils FlexiHash technology. The device authentication is achieved through a challengeresponse scheme customized for low-cost applications, where cloning via eavesdropping without knowledge of the devices secret code is not economically viable. When used for its intended applications, the ISL6296 offers the same level of effectiveness as other significantly more expensive high maintenance monetary-grade hash algorithm and authentication schemes. The ISL6296 has a wide operating voltage range, and is suitable for direct powering from a 1-cell Li-Ion/Li-Poly or a 3-cell series NiMH battery pack. The ISL6296 can also be powered by the XSD bus when the bus pull-up voltage is 3.3V or higher. The device connects directly to the cell terminals of a battery pack, and includes on-chip voltage regulation circuit, POR, and a non-crystal based oscillator for bus timing reference. Communication with the host is achieved through a singlewire XSD interface - a light-weight subset of Intersils ISD bus interface. The XSD bus is compatible for use with serial ports offered by all 8250 compatible UARTs or a single GPIO (general purpose input and output) pin of a microprocessor. A clone prevention solution utilizing the ISL6296 offers safety and revenue protection at the lowest cost and power, and is suitable for protection against after-market replacement for a wide variety of low-cost applications.