IC XDCP 256-TAP 10KOHM 8-MSOP
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Series: | XDCP™ | Manufacturer: | Intersil | ||
Taps: | 256 | Resistance (Ohms): | 10k | ||
Number of Circuits: | 1 | Temperature Coefficient: | ±35 ppm/°C Typical | ||
Maximum Operating Temperature : | + 70 C | Memory Type: | Volatile | ||
Interface: | I²C | Voltage - Supply: | 2.7 V ~ 5.5 V | ||
Operating Temperature: | -40°C ~ 85°C | Mounting Type: | Surface Mount | ||
Package / Case: | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Supplier Device Package: | 8-MSOP |
The ISL90810WIU8 is one member of the ISL90810 family which is designed as the single digitally controlled potentiometer that can be used as three-terminal potentiometer or as two-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing. This device is implemented with a combination of resistor elements and CMOS switches.
Features of the ISL90810WIU8 are:(1)256 resistor taps - 0.4% resolution; (2)I2C serial interface; (3)Wiper resistance: 70?typical @ 3.3V; (4)Standby current 5 uA max; (5)Power supply: 2.7V to 5.5V; (6)50k, 10k total resistance; (7)8 Ld MSOP; (8)Pb-free plus anneal available (RoHS compliant).
The absolute maximum ratings of the ISL90810WIU8 can be summarized as:(1)Storage Temperature: -65°C to +150°C;(2)Voltage at Any Digital Interface Pin With Respect to VSS: -0.3V to VCC+0.3V;(3)Vcc: -0.3 V to +6 V;(4)Voltage at Any DCP Pin With Respect to VSS: -0.3V to Vcc;(5)Lead Temperature (Soldering, 10s): 300°C;(6)IW (10s): ±6 mA.
The electrical characteristics of this device can be summarized as:(1)DCP Wiper Response Time: 1 s;(2)Power-On Recall Voltage: 1.8 to 2.6 V;(3)Vcc Ramp Rate: 0.2 V/ms;(4)Power-Up Delay: 3 ms;(5)Integral Non-Linearity: -1 to 1 MI;(6)Resistance Temperature Coefficient: ±35 ppm/°C;(7)SDA, and SCL Pin Capacitance: 10 pF;(8)SCL Frequency: 400 kHz;(9)SCL Falling Edge to SDA Output Data Valid: 900 ns;(10)Capacitive Loading of SDA or SCL: 10 to 400 pF. If you want to know more information such as the electrical characteristics about it, please download the datasheet in www.seekic.com or www.chinaicmart.com.