Features: · Fully complies with:
· Universal Serial Bus Specification Rev. 2.0
· On-The-Go Supplement to the USB 2.0 Specification Rev. 1.2
· UTMI+ Low Pin Interface (ULPI) Specification Rev. 1.1
· Interfaces to host, peripheral and OTG device cores; optimized for portable devices or system ASICs with built-in USB OTG device core
· Complete Hi-Speed USB physical front-end solution that supports high-speed (480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s)
· Integrated 45 W ± 10 % high-speed termination resistors, 1.5 kW ± 5 % full-speed device pull-up resistor, and 15 kW ± 5 % host termination resistors
· Integrated parallel-to-serial and serial-to-parallel converters to transmit and receive
· USB clock and data recovery to receive USB data at ±500 ppm
· Insertion of stuff bits during transmit and discarding of stuff bits during receive
· Non-Return-to-Zero Inverted (NRZI) encoding and decoding
· Supports bus reset, suspend, resume and high-speed detection handshake (chirp)
· Complete USB OTG physical front-end that supports Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
Application· Digital still camera
· Digital TV
· Digital Video Disc (DVD) recorder
· External storage device, for example:
· Zip drive
· Magneto-Optical (MO) drive
· Optical drive: CD-ROM, CD-RW, DVD
· Mobile phone
· MP3 player
· PDA
· Printer
· Scanner
· Set-Top Box (STB)
· Video cameraPinout
DescriptionThe ISP1504 is a Universal Serial Bus (USB) On-The-Go (OTG) transceiver that is fully compliant with Universal Serial Bus Specification Rev. 2.0, On-The-Go Supplement to the USB 2.0 Specification Rev. 1.2 and UTMI+ Low Pin Interface (ULPI) Specification Rev. 1.1.
The ISP1504 can transmit and receive USB data at high-speed (480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s), and provides a pin-optimized, physical layer front-end attachment to USB host, peripheral and OTG devices.
It is ideal for use in portable electronic devices, such as mobile phones, digital still cameras, digital video cameras, Personal Digital Assistants (PDAs) and digital audio players. It allows USB Application-Specific Integrated Circuits (ASICs), Programmable Logic Devices (PLDs) and any system chip set to interface with the physical layer of the USB through a 12-pin interface.
The ISP1504 can interface to the link with digital I/O voltages in the range of 1.65 V to 3.6 V.
The ISP1504 is available in HVQFN32 package.
ISP1504C Data Sheet
