MFG:FAI Package Cooled:DIP-24 D/C:00+
MFG: FAI
Package Cooled: DIP-24
D/C: 00+
Description: The KA3080 , KA3080D, KA3080DM are a monolithic integrated circuit, and it is suitable for 3-phase cap...
The KA3080 , KA3080D, KA3080DM are a monolithic integrated circuit, and it is suitable for 3-phase capstan motor driver for VCR system.
|
Parameter |
Symbol |
Value |
Unit |
Remark |
| Supply Voltage (Signal) |
VCC1max |
7 |
V |
- |
| Supply Voltage (Power) |
VCC2max |
28 |
V |
- |
| Maxium Output Current |
IOmax |
1.5note1 |
A / Phase |
VCC1=5V, VCC2=16V |
| Power Dissipation |
Pd |
2.4note2 |
W |
32SDIPH-400 |
|
1.7note2 |
W |
28SSOPH-375 | ||
|
2.5note2 |
W |
28SSOPH-375SG2 | ||
| Junction Temperature |
TJ |
150 |
°C |
VCC1=5V, VCC2=16V |
| Operating Temperature |
TOPR |
-25 ~ +75 |
°C | |
| Storage Temperature |
TSTG |
-40 ~ +125 |
°C |
Note:
1. Duty 1 / 100, pulse width 500s
2. 1) When mounted on glass epoxy PCB (76.2 * 114 * 1.57mm)
2) Power dissipation reduces 13.6mW / °C for using above Ta=25°C. (32SDIPH Type)
Power dissipation reduces 19.2mW / °C for using above Ta=25°C. (28SSOPH Type)
Power dissipation reduces 20.0mW / °C for using above Ta=25°C. (28SSOPH -SG2 Type)
3) Do not exceed Pd and SOA(Safe Operating Area).
KA3080
PDF/DataSheet Download
The KA3050 is a monolithic integrated circuit, and suitable for the motor driver (AE, AF, zoom and reel motor driver) and the controller (strobo trigger, IRED driver, supply voltage detector, step-up converter control, etc.) in camera systems.
The FAN8037 is a monolithic integrated circuit suitable for a 7-ch motor driver which drives the tracking actuator, focus actuator, sled motor, tray motor, changer motor, panel motor and, spindle motor of the CDP/CAR-CD systems.
The KA3032 is a monolithic integrated circuit suitable for a 5-ch motor driver which drives the tracking actuator, focus actuator, sled motor, spindle motor, and tray motor of the CDP system.
The KA3031 is a monolithic integrated circuit suitable for a 6-ch motor driver which drives the tracking actuator, focus actuator, sled motor, tray motor, change motor and spindle motor of the CDP/CAR-CD systems.
The KA3030D is a monolithic integrated circuit, suitable for a 6-ch motor drivers which drive focus actuator, tracking actuator, sled motor, spindle motor, loading motor and changer of CD system.
The KA3027D2 is a monolithic IC, suitable for a 1-ch (forward. reverse) control DC motor driver and a 3-ch motor driver which drives the focus actuator,tracking actuator, and sled motor of a CD-media system.
Price: 1-2 USD
BGA, FPGA, Programmable Logic Device, High density, Built-in low-skew clock tree, 3.3V
Price: 0.01-100 USD
large capacitance, aluminum electrolytic capacitor, 160 to 450Vdc, 1000uF
Price: 1-10 USD
LM3364K-15 SANYO DIP
Price: 2.5-4.18 USD
I2C Bus Control IC, Monolithic Linear IC, DIP, Single crystal multiformat system, 5V
Price: 1-4 USD
1200V, 26A, TO-247AD, DSEI30-12A, fast recovery epitaxial diode, 125 W, 1.2 Nm
Price: 0.08-0.1 USD
three-terminal, positive regulators, DPAK packages
Price: 0.1-0.2 USD
SOT223, PNP silicon planar, high voltage transistor, 500 Volt, 2 Watt
Price: 0.5-0.9 USD
monolithic sample-and-hold circuit, DIP, ±18V, Less than 10 μs acquisition time, Low output noise
Price: 0.6-1 USD
8-bit, microcomputer, DIP
Price: 0.1-1 USD
transceiver, 3.0V to 5.5V, SOP
Price: 10-20 USD
LCD module, 6.0 V, 4.75 to 5.25V, 1,000 mA, 900 Vrms, 51 to 59KHz
Price: 2.47-2.69 USD
24-HTSSOP, dual-output voltage regulators, power up sequencing, -0.3 V to 7 V
