MFG:FDS Package Cooled:SMD-28 D/C:09+
MFG: FDS
Package Cooled: SMD-28
D/C: 09+
Description: The KA3080 , KA3080D, KA3080DM are a monolithic integrated circuit, and it is suitable for 3-phase cap...
The KA3080 , KA3080D, KA3080DM are a monolithic integrated circuit, and it is suitable for 3-phase capstan motor driver for VCR system.
|
Parameter |
Symbol |
Value |
Unit |
Remark |
| Supply Voltage (Signal) |
VCC1max |
7 |
V |
- |
| Supply Voltage (Power) |
VCC2max |
28 |
V |
- |
| Maxium Output Current |
IOmax |
1.5note1 |
A / Phase |
VCC1=5V, VCC2=16V |
| Power Dissipation |
Pd |
2.4note2 |
W |
32SDIPH-400 |
|
1.7note2 |
W |
28SSOPH-375 | ||
|
2.5note2 |
W |
28SSOPH-375SG2 | ||
| Junction Temperature |
TJ |
150 |
°C |
VCC1=5V, VCC2=16V |
| Operating Temperature |
TOPR |
-25 ~ +75 |
°C | |
| Storage Temperature |
TSTG |
-40 ~ +125 |
°C |
Note:
1. Duty 1 / 100, pulse width 500s
2. 1) When mounted on glass epoxy PCB (76.2 * 114 * 1.57mm)
2) Power dissipation reduces 13.6mW / °C for using above Ta=25°C. (32SDIPH Type)
Power dissipation reduces 19.2mW / °C for using above Ta=25°C. (28SSOPH Type)
Power dissipation reduces 20.0mW / °C for using above Ta=25°C. (28SSOPH -SG2 Type)
3) Do not exceed Pd and SOA(Safe Operating Area).
KA3011
PDF/DataSheet Download
The KA3080 , KA3080D, KA3080DM are a monolithic integrated circuit, and it is suitable for 3-phase capstan motor driver for VCR system.
The KA3050 is a monolithic integrated circuit, and suitable for the motor driver (AE, AF, zoom and reel motor driver) and the controller (strobo trigger, IRED driver, supply voltage detector, step-up converter control, etc.) in camera systems.
The FAN8037 is a monolithic integrated circuit suitable for a 7-ch motor driver which drives the tracking actuator, focus actuator, sled motor, tray motor, changer motor, panel motor and, spindle motor of the CDP/CAR-CD systems.
The KA3032 is a monolithic integrated circuit suitable for a 5-ch motor driver which drives the tracking actuator, focus actuator, sled motor, spindle motor, and tray motor of the CDP system.
The KA3031 is a monolithic integrated circuit suitable for a 6-ch motor driver which drives the tracking actuator, focus actuator, sled motor, tray motor, change motor and spindle motor of the CDP/CAR-CD systems.
The KA3030D is a monolithic integrated circuit, suitable for a 6-ch motor drivers which drive focus actuator, tracking actuator, sled motor, spindle motor, loading motor and changer of CD system.
Price: 1.2-2 USD
PDIP, 8-bit, monolithic, CMOS parallel flash, A/D converter, +7V, low power CMOS
Price: 0.1-1 USD
1-Wire Digital Thermometer, TO-92, Alarm Search Command Identifies, 3.0V to 5.5V
Price: 1.55-1.58 USD
48-ball TSSOP, 16 MEGABIT, CMOS, FLASH MEMORY, 16 Mbit, 3.0 Volt-only, –0.5 V to +12.5 V
Price: 0.01-0.02 USD
WM8196SCDS - (8 8) Bit Output 16-bit CIS/CCD AFE/Digitiser - Wolfson Microelectronics plc
Price: 5-6 USD
CCD solid-state image sensor, 24.54MHz, DIP, –0.3 to +36 V, ICX424AQ
Price: 0.01-100 USD
multi layer ceramic capacitor (MLCC), 22uF, DO-214
Price: 0.1-10 USD
TOPSwitch-GX, TO-220, -0.3 V to 700 V, No heatsink, Wider duty cycle, no turn off glitches
Price: 8-12.5 USD
3A continuous output, 55V supply voltages, H-Bridge, ZIP, Shorted load protection
Price: 0.1-10 USD
Integrated Off-line Switcher, TO220, 125W, 700V, 66 ~ 132kHz, TOP246YN, Power
Price: 2.7-2.8 USD
Field Programmable Gate Array, QFP100, –0.5V to VCC +0.5V, low-skew clock nets
Price: 1.25-1.5 USD
high votage, high speed, power MOSFET and IGBT driver, SOP, 10 to 20V, 1.6W
Price: 1.22-1.5 USD
QFP-48 in tray, 7.1 Channel, High Definition, Audio Codec , independent SPDIF outputs, 3.6 V
