KBC1100L

Features: 3.3V Operation with 5V Tolerant Buffers ACPI 1.0b/2.0 and PC99a/PC2001 Compliant LPC Interface with Clock Run Support- Serial IRQ Interface Compatible with Serialized IRQ Support for PCI Systems- 15 Direct IRQs- Three 8-Bit DMA Channels- ACPI SCI Interface- nSMI- Shadowed write only reg...

product image

KBC1100L Picture
SeekIC No. : 004384179 Detail

KBC1100L: Features: 3.3V Operation with 5V Tolerant Buffers ACPI 1.0b/2.0 and PC99a/PC2001 Compliant LPC Interface with Clock Run Support- Serial IRQ Interface Compatible with Serialized IRQ Support for PCI ...

floor Price/Ceiling Price

Part Number:
KBC1100L
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/4/27

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

3.3V Operation with 5V Tolerant Buffers
ACPI 1.0b/2.0 and PC99a/PC2001 Compliant
LPC Interface with Clock Run Support
- Serial IRQ Interface Compatible with Serialized IRQ Support for PCI Systems
- 15 Direct IRQs
- Three 8-Bit DMA Channels
- ACPI SCI Interface
- nSMI
- Shadowed write only registers
LPC/Firmware Hub Host Flash Interface
- Single Byte FWH Memory Read and FWH Memory Write Support
- FWH ID Support
- 16MB FWH Flash and Register Addressing,128K Legacy BIOS Addressing
- Single Byte LPC Memory Read and LPC Memory Write Support
Serial Peripheral Interface (SPI)
- 2-pin interface with single Data In/Out Data pin
- Single Ported Controller with Keeper Circuit
8 MByte Shared FlashROM Interface (SFI)
- 8051/Host CPU Hardware Arbitrated Interface
- 0.5 - 8MB - Host System BIOS & 8051 Keyboard
- 8051 64KB Code Space Accessible as Separate 32KB Pages in Flash
- Low-Power Flash Access Modes
- 8051-Programmable Flash Access Protection
Read/Write/No-Access Protection
Variable Bank Sizes
Host Flash Address Redirection for Recovery
Serial Flash Programming Interface
Two Power Planes
- Low Standby Current in Sleep Mode
- Intelligent Auto Power Management for Super I/O
- Main powered blocks power supplied by standby power plane and controlled by power management signals
3-Port ACPI Embedded Controller Interface
Configuration Register Set
- Compatible with ISA Plug-and-Play Standard (Version 1.0a)
- Four Pin Selectable Addressing Options
- 8051-Programmable Base Address
High-Performance Embedded 8051 Keyboard and System Controller
- Provides System Power Management
- System Watch Dog Timer (WDT)
- 8042 Style Host Interface Relocatable to 480 Different Base I/O Addresses
- Supports Interrupt and Polling Access
- Interrupt Accelerator
- 512 Bytes Data RAM
- 2 Kilobytes Scratch ROM/RAM
- On-Chip Memory-Mapped Control Registers
- Up to 18x8 Keyboard Scan Matrix
- Two 16 Bit Timer/Counters
- Eleven 8051 Interrupt Sources
- Thirty-Two 8-Bit, Host/8051 Mailbox Registers
- Thirty-six Maskable Hardware Wake-Up Events
- Fast GATEA20
- Fast CPU_RESET
- Multiple Clock Sources and Operating Frequencies up to 32MHz
- IDLE and SLEEP Modes
- Low Power Fail-Safe Ring Oscillator ±10% Accuracy
- Hibernation Timer with programmable wake-up from 0.5ms to 128 minutes
- 8051-Driven 16550A UART
16-Byte Send/Receive FIFOs
External Baud Clock Option
- Power-Fail Status Register
Battery Backed Resources
- 32KHz clock generator
- 1 Week Wakeup timer
One 8584-Style SMBus Controller
- 8051 Host Interface Logic Allows Master or Slave Operation
- Controllers are Fully Operational on Standby Power
- 2 Ports per Controller



Description

The KBC1100L is an integrated Keyboard/System Management Controller which incorporates a highperformance 8051 Micro-Controller, an LPC Bus/Firmware Hub Host Interface and a Super I/O. The KBC1100L is powered by two separate supply planes (VCC1, VCC0) to provide "instant on" and sophisticated system power management functions. The KBC1100L power control circuitry supports multiple low power-down modes.

The KBC1100L incorporates a Direct Battery Management (DBM) with SMSC SentinelAlert! accessible by the 8051. Together with external remote temperature sensor(s) can provide complete Analog Monitoring & Control System. The KBC1100L DBM includes an 8 channel ADC, a 3 channel DAC with SMSC SentinelAlert! and up to 2 SMSC SentinelAlert! GPIO's, two channel one-pin Temperature Sensor Communication Links, and a hardware protect output that requires no programming or 8051 intervention to operate.

The KBC1100L incorporates a Standby Power Reset Generator (RESGEN) which monitors the VCC1 power input and generates the internal VCC1 power on reset for the KBC1100L. The KBC1100L also outputs VCC1RST# which can be used to reset the Flash memory on the Shared Flash Interface (SFI). A block diagram of the KBC1100L including the distribution of the supply planes is shown in Figure 1 on page 5.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Fans, Thermal Management
Static Control, ESD, Clean Room Products
RF and RFID
Isolators
Boxes, Enclosures, Racks
View more