Purchase KK4053B, In-stock KK4053B From SeekIC.


Part Number: KK4053B
Description: The KK4053B analog multiplexer/demultiplexer is digitally controlled analog switches having low ON imp...


Description: The KK4053B analog multiplexer/demultiplexer is digitally controlled analog switches having low ON imp...
The KK4053B analog multiplexer/demultiplexer is digitally controlled analog switches having low ON impedance and very low OFF leakage current. Control of analog signals up to 20V peak-to-peak can be achieved by digital signal amplitudes of 4.5 to 20V (if VCC - GND = 3V, a VCC - VEE of up to 13 V can be controlled; for VCC - VEE level differences above 13V a VCC - GND of at least 4.5V is required).
These multiplexer circuits dissipate extremely low quiescent power over the full VCC -GND and VCC - VEE supply-voltage ranges, independent of the logic state of the control signals. When a logic "1"is present at the ENABLE input terminal all channels are off.
The KK4053B is a triple 2-channel multiplexer having three separate digital control inputs, A, B, and C, and an enable input. Each control input selects one of a pair of channels which are connected in a singlepole double-throw configuration.
|
Symbol |
Parameter |
Value |
Unit |
|
VCC |
DC Supply Voltage (Referenced to GND) |
-0.5 to +20 |
V |
|
VIN |
DC Input Voltage (Referenced to GND) |
-0.5 to VCC +0.5 |
V |
|
IIN |
DC Input Current, per Pin |
±10 |
mA |
|
PD |
Power Dissipation in Still Air |
500*1 |
mW |
|
Ptot |
Power Dissipation per Output Transistor |
100 |
mW |
|
TSTG |
Storage Temperature |
-65 to +150 |
|
|
TL |
Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) |
260 |
KK40F120
PDF/DataSheet Download
