Features: `Outputs Directly Interface to CMOS, NMOS, and TTL`Operating Voltage Range: 2.0 to 6.0 V `Low Input Current: 1.0 A; o.1 A @ 25 `High Noise Immunity Characteristic of CMOS Devices `Outputs Source/Sink 24 mA PinoutSpecifications Symbol Parameter Value Unit VCC DC Supply Vol...
KK74AC640: Features: `Outputs Directly Interface to CMOS, NMOS, and TTL`Operating Voltage Range: 2.0 to 6.0 V `Low Input Current: 1.0 A; o.1 A @ 25 `High Noise Immunity Characteristic of CMOS Devices `Outputs ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

| Symbol | Parameter | Value | Unit |
| VCC | DC Supply Voltage (Referenced to GND) | -0.5 to +7.0 | V |
| VIN | DC Input Voltage (Referenced to GND) | -0.5 to VCC +0.5 |
V |
| VOUT | DC Output Voltage (Referenced to GND) | -0.5 to VCC +0.5 |
V |
| IIN | DC Input Current, per Pin | ±20 | mA |
| IOUT | DC Output Sink/Source Current, per Pin | ±50 | mA |
| ICC | DC Supply Current, V and GND Pins | ±50 | mA |
| PD | Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ |
750 500 |
mW |
| Tstg | Storage Temperature | -65 to +150 | |
| TL | Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) |
260 |
The KK74AC640 is identical in pinout to the LS/ALS640, HC/HCT640. The device inputs are compatible with andard MOS outputs; with pullup resistors, they are compatible with LS/ALS outputs.
The KK74AC640 is a 3-state transceiver that is used for 2-way asynchronous communication between data buses. The device has an active-low Output Enable pin, which is used to place the I/O ports into high-impedance states. The ction control determines whether data flows from A to B or from B to A.