MFG:Other Category:Other
Category: Other
MFG: Other
Description: The KM424C64-10 is one member of the KM424C64 family which is designed as the general purpose PWM boost converter that ca...
The KM424C64-10 is one member of the KM424C64 family which is designed as the general purpose PWM boost converter that can be used in (1)3.3V to 5V, 5V to 12V conversion; (2)Distributed Power; (3)Set-Top Boxes; (4)DSL Modems; (5)Diagnostic Medical Instrumentation; (6)Boost Converters; (7)Flyback Converters; (8)SEPIC Converters. This device features a pin selectable switching frequency of either 600kHz or 1.25MHz, and can operates with input voltages as low as 2.2V and as high as 12V.
Features of the KM424C64-10 are:(1)1.9A, 0.2W, internal switch (typical); (2)Operating voltage as low as 2.2V; (3)600kHz/1.25MHz adjustable frequency operation; (4)Switchers Made Simple software; (5)8-Lead MSOP package.
The absolute maximum ratings of the KM424C64-10 can be summarized as:(1)VIN: -0.3V </= VIN </= 12V;(2)SW Voltage: -0.3V </= VSW </= 18V;(3)FB Voltage: -0.3V </= VFB </= 7V;(4)VC Voltage: 0.965 < VC < 1.565;(5)Maximum Junction Temperature: 150°C;(6)Power Dissipation: Internally Limited;(7)Lead Temperature: 300°C;(8)ESD Susceptibility Human Body Model: 2kV;(9)ESD Susceptibility Machine Model: 200V. If you want to know more information such as the electrical characteristics about the KM424C64-10, please download the datasheet in www.seekic.com or www.chinaicmart.com.
KM424C64-10
PDF/DataSheet Download
The Samsung KM4216C258 is a CMOS 256K x 16 bit Dual Port DRAM. It consists of a 256K x 16 dynamic random access memory (RAM) port and 512 x 16 static serial access memory (SAM) port.The RAM and SRAM port operate asynchronously except during data transfer bet...
The KM4216C256 is designed as the 262,144 x 16 bit extended data out CMOS DRAMs. This device CAS-before-RAS refresh, RAS-only refresh and Hidden refresh capabilities. Furthermore, Self-refresh operation is available in L-version. This 1Mx16 EDO Mode DRAM fam...
The KM4212 is an ultra-low power, low cost, voltage feedback amplifier. The KM4212 uses only 70A of supply current and is designed to operate on +2.7V, +5V, or ±2.5V supplies. The input voltage range extends 300mV below the negative rail and 1.2V below the p...
The KM4211 is a dual ultra-low power, low cost, voltage feedback amplifier. The KM4211 uses only 208A of supply current per amplifier and is designed to operate from 2.5V to 5.5V or ±1.25V to ±2.75V supplies. The input voltage range extends 300mV below the n...
The KM4210 is a dual, low power, low cost, voltage feedback amplifier. The KM4210 uses only 505µA of supply current per amplifer, and is designed to operate on +2.7V, +5V, or ±2.5V supplies. The input voltage range extends 300mV below the negative rail...
The KM4200 is a dual, low cost, voltage feedback amplifier. This amplifier is designed to operate on +2.7V, +5V, or ±2.5V supplies. The input voltage range extends 300mV below the negative rail and 1.2V below the positive rail. The KM4100 (single) and KM4101...
Price: 2-5 USD
quad channel driver, SOP-16, 5.0 V, -1.0 mA, High Speed CMOS Technology
Price: 0.3-1 USD
4 Mbit, 5.0 volt-only Flash memory, PLCC, 200 mA, 5.0 V, 0.32 μm process technology
Price: 0.1-1 USD
single cell battery powered, electroluminescent lamp driver/inverter, SOP-8, 400mW
Price: 0.62-0.78 USD
HEXFET, TO-220, -12 A, dynamic dv/dt rating, fast switching, 400 mJ
Price: 1-2 USD
STK392-150-E Sanyo Semiconductor Current Amplification for Projection TV Use
Price: 9-10 USD
D-subminiature Metal Shell, DIP, Minimum 1250V RMS sea level, 2.7 milliohms maximum
Price: 1-4 USD
TO252, N-channel, 60V, MOSFET, logic level, 30 A, 0.1 mH, 50W
Price: 4.2-8.6 USD
flash microcontroller, SMD, 1.0W
Price: 1.03-1.11 USD
DIP-8, excalibur high-speed, jfet-input operational amplifier, ±19 V, 160 mA
Price: 0.1-1 USD
Optocoupler, DIP, 25 mA
Price: 0.56-2.06 USD
low-power CMOS 8-bit microcontroller, 8K, 8MHZ, 3V, 32-QFN, 40.0mA
Price: 0.1-1 USD
7ch darlington sink driver, SOL16, high sustaining voltage output 50V, ULN2003AFWG
