Purchase L6243D, In-stock L6243D From SeekIC.
MFG:ST


Part Number: L6243D
MFG: ST
Description: The L6243/D is a Bipolar IC developed for use in Hard Disk Head Actuator positioning applications. The...
MFG:ST


MFG: ST
Description: The L6243/D is a Bipolar IC developed for use in Hard Disk Head Actuator positioning applications. The...
The L6243/D is a Bipolar IC developed for use in Hard Disk Head Actuator positioning applications. The Power Op-Amp Output Bridge, Differential Amplifier, and Error Amplifier, are controlled by TTL/CMOS, input compatible, Digital Logic, and an Analog Current Control Voltage. A simple RC compensation network, tied to the output of the Error Amp, will configure the system to work as a Transconductance Amplifier to drive a Voice Coil Motor in LinearMode.
Additional features include Power On Reset Delay, Enable and Park, as well as a general purpose Operational Amplifier. A logic low at the Park input activates the parking function. Holding the Enable input low will disable the device by forcing the outputs into a tristate mode. Power Fail Monitors for the logic and power supplies initiate an automatic parking sequence during a power failure. A resistor programmed parking voltage enables a constant velocity head retract.
|
Symbol |
Parameter |
Value |
Unit |
|
VS |
Supply Voltage |
18 |
V |
|
VIN |
Input Voltage |
0.3V to VS |
|
|
VID |
Differential Input Voltage |
±VS |
|
|
IO |
DC Output Current |
2 |
A |
|
IP |
Peak Output Current (non repetitive) |
2.5 |
A |
|
Ptot |
Total Power Dissipation (Tamb = 70°C) for L6243 for L6243D |
2 1.2 |
W W |
|
Tstg |
Storage and Junction Temperature |
-55 to +150 |
°C |
L6243D
PDF/DataSheet Download








