Power Driver ICs CFL/TL Ballast
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Type : | Driver | Rise Time : | 120 ns |
Fall Time : | 80 ns | Supply Voltage - Min : | 10 V |
Supply Current : | 25 mA | Maximum Operating Temperature : | + 125 C |
Mounting Style : | Through Hole | Package / Case : | PDIP-16 |
Packaging : | Tube |
Symbol | Parameter | Value | Unit |
IS | Supply Current (*) | 25 | mA |
VLVG | Low Side Output | -0.3 to Vs +0.3 | V |
VOUT | High Side Reference | -1 to VBOOT -18 | V |
VHVG | High Side Output | -1 to VBOOT | V |
VBOOT | Floating Supply Voltage | -1 to 618 | V |
dVBOOT/dt | VBOOT pin Slew rate (repetitive) | ±50 | V/ns |
dVOUT/dt | OUT pin Slew Rate (repetitive) | ±50 | V/ns |
Vir | Forced Input Voltage (pins Ring, Rpre) | -0.3 to 5 | V |
Vic | Forced Input Voltage (pins Cpre, Cf) | -0.3 to 5 | V |
VEN1, VEN2 | Enable Input Voltage | -0.3 to 5 | V |
IEN1, IEN2 | Enable Input Current | ±3 | mA |
Vopc | Sense Op Amp Common Mode Range | -0.3 to 5 | V |
Vopd | Sense Op Amp Differential Mode Range | ±5 | V |
Vopo | Sense Op Amp Output Voltage (forced) | 4.6 | V |
Tstg, Tj | Storage Temperature | -40 to +150 | °C |
Tamb | Ambient Temperature | -40 to +125 | °C |
In order to ensure voltage ratings in excess of 600V, the L6574 is manufactured with BCD OFF LINE technology, which makes it well suited for lamp ballast applications.
The L6574 is intended to drive two power MOSFETS, in the classical half bridge topology, ensuring all the features needed to drive and properly control a fluorescent bulb.
A dedicated timing section in the L6574 allows the user set the necessary parameters for proper preheat and ignition of the lamp.
Also, an OP AMP is available to implement closed loop control of the lamp current during normal lamp burning.
An integrated bootstrap section, eliminating the normally required bootstrap diode and the zener clamping on Vs, makes the L6574 well suited for low cost applications where few additional components are needed to build a high performance ballast.
Technical/Catalog Information | L6574 |
Vendor | STMicroelectronics |
Category | Integrated Circuits (ICs) |
Package / Case | 16-DIP (300 mil) |
Packaging | Tube |
Voltage - Supply | 10 V ~ 15.6 V |
Type | CCFL Driver |
Current - Supply | 2mA |
Current - Output | 450mA |
Frequency | 60 ~ 120 kHz |
Operating Temperature | -40°C ~ 125°C |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | L6574 L6574 497 7252 5 ND 49772525ND 497-7252-5 |