L9813

` 8-18V Supply Operating Range
` 16 MHz Maximum Oscillator Frequency
` 8 MHz Maximum Internal Clock Frequency
` Fully Static operation.
` Low consumption ( 100mA) mode.
` -40°C to + 150°C Temperature Range
` ROM: 8Kbytes
` Data RAM: 256 bytes
` 64 pin HiQuad package
` 5 multifunctional bidirectional I/O lines
` 16-bit Timer, featuring:
    2 Input Captures
    2 Output Compares
    External Clock input
    PWM and Pulse Generator modes
` UART peripheral including Bus line interface according ISO9141 specifications
` Serial Peripheral Interface (SPI).
` 8-bit Analog-to-Digital Converter with 2 dedicated inputs.
` Programmable Watchdog for system integrity
` Master Reset and Power-On Reset
` Two 200m Half-Bridges, Two 400m Half- Bridges for sequential driving of 3 DC motors.
` 50m High-Side driver (Defroster function)
` 300m High-Side driver (Sidemarker function)
` 400m High-Side driver (Puddle Lamp function)
` 300m High-Side driver + Parallel Voltage Regulator (Electro Chrome function
` 8-bit Data Manipulation
` 63 basic Instructions and 17 main Addressing Modes
` 8 x 8 Unsigned Multiply Instruction
` True Bit Manipulation
` Complete Development Support on DOS/ WINDOWS™ Real-Time Emulator
` Full Software Package on DOS/WINDOWS™ (C-Compiler, Cross-Assembler, Debugger)

The L9813 Microcontroller Unit (MCU) is a member of the ST7 family of Microcontrollers.

The L9813 is based on an industry-standard 8-bit core and features an enhanced instruction set.

The device is normally operated at an 16MHz oscillator frequency. Under software control, the L9813 may be placed in either Wait, Slow or Halt modes, thus reducing power consumption.

The enhanced instruction set and addressing modes afford real programming potential. In addition to standard 8-bit data management, the L9813 features true bit manipulation, 8x8 unsigned multiplication and indirect addressing modes.

The L9813 includes an internal oscillator, CPU, ROM/OTP/EPROM, RAM, 5 I/O lines and the following on-chip peripherals: Analog-to-Digital converter (ADC) with 5 multiplexed analog inputs, industry standard synchronous SPI and asynchronous SCI serial interfaces, digital Watchdog, 16- bit Timer, 2 Input Captures and 2 Output Compares.