LH1502BACTR

Control Voltage Range :
Product Type : PCB Mount
Mounting Style : SMD/SMT
Output Device : MOSFET
Load Voltage Rating : 350 V
Package / Case : SMD-8
Contact Form : 1 Form A (SPST-NO), 1 Form B (SPST-NC)
Load Current Rating : 0.15 A


Features:

• Current Limit Protection
• l/O Isolation, 3750 V_RMS
• Typical R_ON20
• Load Voltage 350 V
• Load Current 150 mA
• High Surge Capability
• Linear, AC/DC Operation
• Clean Bounce Free Switching
• Low Power Consumption
• SMD Lead Available on Tape and Reel




Application

• General Telecom Switching
On/off Hook Control
Ring Delay
Dial Pulse
Ground Start
Ground Fault Protection
• Instrumentation
• Industrial Controls




Specifications

TA=25
Stresses in excess of the Absolute Maximum Ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to maximum rating conditions for extended periods can adversely affect device reliability.
Ambient Operating Temperature Range,T_A..................40 to +85
Storage Temperature Range,T_stg.............................. 40 to +125
Pin Soldering Temperature, t=10 s max,T_S.............................. 260
Input/Output Isolation Test Voltage,
t=1.0 s,I_ISO=10A max.,V_ISO.........................................3750 VRMS
Pole-to-Pole Isolation Voltage (S1 to S2)*
(dry air, dust free, at sea level) ...........................................1600 V
LED Continuous Forward Current,I_F.........................................50 mA
LED Reverse Voltage,I_R10A,V_R............................................ 8.0 V
dc or Peak ac Load Voltage,I_L50A,V_L.................................. 350 V
Continuous dc Load Current,I_L
(Form C Operation) .............................................................150 mA
Peak Load Current,IP
(t=100 ms) Form A ........................................................................ †
(single shot) Form B ............................................................ 350 mA
Output Power Dissipation (continuous),PDISS.......................600 mW
* Breakdown occurs between the output pins external to the package.
† Refer to Current Limit Performance Application Note for a discussion on relay operation during transient currents.

Description

The LH1502BACTR relays contain normally open and normally closed switches that can be used independently as a 1 Form A and 1 Form B relay, or when used together, as a 1 Form C relay. The relays are constructed as a mult.- chip hybrid device. Actuation contral is via an Infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity.