Features: ` 0.1 A typical quiescent current (OFF state)` 1 Amp output current guaranteed` g85V transient protection` Reverse voltage protection` Negative output voltage clamp` Error flag output` Internal overvoltage shutdown` Internal thermal shutdown` Short circuit proof` High speed switching (up...
LM1951: Features: ` 0.1 A typical quiescent current (OFF state)` 1 Amp output current guaranteed` g85V transient protection` Reverse voltage protection` Negative output voltage clamp` Error flag output` Int...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The LM1951 is a high current, high voltage, high side (PNP) switch with a built-in error detection circuit.
The LM1951 is guaranteed to deliver 1 Amp output current and is capable of withstanding up to g85V transients. The built-in error detection provides an error flag output under the following fault conditions: output short to ground or supply, open load, current limit, overvoltage or thermal shutdown.
The LM1951 will drive all types of resistive or inductive loads. The output has a built-in negative voltage clamp (& b30V) to provide a quick energy discharge path for inductive loads. The LM1951 features TTL and CMOS compatible logic input with hysteresis. Switching times, both turn on and turn off, are 2 ms (Cload k 0.005 F). In addition, its quiescent current in the OFF state is typically less than 0.1 mA at room temperature and less than 10 mA over the entire operating temperature and voltage range.
The LM1951 features make it well suited for industrial and automotive applications.