Features: 3.3V, 5V, 12V, 15V, and adjustable output versions
Adjustable version output voltage range,
1.23V to 37V (57V for HV version) ±4% max over
line and load conditions
Guaranteed 1A output current
Wide input voltage range, 40V up to 60V for HV version
Requires only 4 external components
52 kHz fixed frequency internal oscillator
TTL shutdown capability, low power standby mode
High efficiency
Uses readily available standard inductors
Thermal shutdown and current limit protection
P+Product Enhancement tested
ApplicationSimple high-efficiency step-down (buck) regulator
Efficient pre-regulator for linear regulators
On-card switching regulators
Positive to negative converter (Buck-Boost)Pinout
SpecificationsMaximum Supply Voltage
LM1575/LM2575 45V
LM2575HV 63V
Output Voltage to Ground
(Steady State)−1V
Power DissipationInternally Limited
Storage Temperature Range −65˚C to +150˚C
Maximum Junction Temperature 150˚C
| Output Current |
1000 mA |
| Input Min Voltage |
4 Volt |
| Input Max Voltage |
60 Volt |
| Output Min |
3.3, 1.23, 12, 15, 5 Volt |
| Output Max |
3.3, 57, 12, 15, 5 Volt |
| Frequency Min |
52 kHz |
| Frequency Max |
52 kHz |
| Efficiency (peak) |
88, 77, 75 % |
| On/Off Pin |
Yes |
| Error Flag |
No |
| SoftStart |
No |
| Sync Pin |
No |
| Inverting |
Yes |
| Flyback |
No |
| RegType |
Switching Regulator |
| Temperature Min |
-40 deg C |
| Temperature Max |
125 deg C |
| Adjustable Output |
Yes, No |
| Adj Switch Frequency |
No |
| PWM Mode |
Voltage |
| Topology |
Buck |
| Special Features |
SIMPLE SWITCHER regulator |
| Step-Down |
Yes |
| Multiple Output Capability |
No |
| Output Power |
Undefined Watt |
| Output Voltage |
3.3, Undefined, 12, 15, 5 Volt |
| Output Range |
15V, 5V, 12V, 3.3V, 1.23V to 57V |
| Switching Frequency |
52 kHz |
| Regulator Family |
SIMPLE SWITCHER |
| Synchronous Rectification |
No |
| View Using Catalog |
DescriptionThe LM2575HV series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5V, 12V, 15V, and an adjustable output version. Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation and a fixed-frequency oscillator. The LM2575 series offers a high-efficiency replacement for popular three-terminal linear regulators. It substantially reduces the size of the heat sink, and in many cases no heat sink is required.
A standard series of inductors optimized for use with the LM2575 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. Other features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring 50 µA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as thermal shutdown for full protection under fault conditions.
LM2575HV Data Sheet
