PinoutSpecificationsSupply Min3 VoltSupply Max26 VoltGain Bandwidth1 MHzSlew Rate0.5 Volts/usecOffset Voltage max, 25C7 mVMax Input Bias Current500 nAInput OutputTypeVcm to V-, Not R-R OutSupply Current Per Channel0.18 mAPowerWise Rating 2180 uA/MHzChannels4 ChannelsOutput Current20 mAShut downNoS...
LM2902EP: PinoutSpecificationsSupply Min3 VoltSupply Max26 VoltGain Bandwidth1 MHzSlew Rate0.5 Volts/usecOffset Voltage max, 25C7 mVMax Input Bias Current500 nAInput OutputTypeVcm to V-, Not R-R OutSupply Cur...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Supply Min | 3 Volt |
Supply Max | 26 Volt |
Gain Bandwidth | 1 MHz |
Slew Rate | 0.5 Volts/usec |
Offset Voltage max, 25C | 7 mV |
Max Input Bias Current | 500 nA |
Input OutputType | Vcm to V-, Not R-R Out |
Supply Current Per Channel | 0.18 mA |
PowerWise Rating 2 | 180 uA/MHz |
Channels | 4 Channels |
Output Current | 20 mA |
Shut down | No |
Special Features | Undefined |
Voltage Noise | 40 nV/root(Hz) |
Temperature Max | 85 deg C |
Temperature Min | -40 deg C |
Function | Op Amp |
View Using Catalog |
The LM2902EP consists of four independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.
Application areas include transducer amplifiers, DC gain blocks and all the conventional op amp circuits which now can be more easily implemented in single power supply systems. For example, the LM2902 can be directly operated off of the standard +5V power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional ±15V power supplies.
ENHANCED PLASTIC