LM358DT

The LM358DT is one member of the LM358 series.These circuits consist of two independent, high-gain, internally frequency-compensated which were designed specifically to operate from a single power supply over a wide range of voltages.The low power supply drain is independent of the magnitude of the power supply voltage.

Features of the LM358DT are:(1)internally frequency compensated; (2)Large DC voltage gain: 100dB; (3)wide bandwidth (unity gain): 1.1mHz(temperature compensated); (4)very low supply current/op (500A) essentially independent of supply voltage; (5)low input bias current: 20nA(temperature compensated); (6)low input offset voltage: 2mV; (7)low input offset current: 2nA; (8)input common-mode voltage range includes ground; (9)differential input voltage range equal to the power supply voltage; (10)large output voltage swing 0V to (Vcc - 1.5V).

The absolute maximum ratings of the LM358DT can be summarized as:(1)supply voltage:+/-16 or 32 V;(2)input voltage:-0.3 to 32V;(3)input current:50mA;(4)storage temperature:-65 to 150;(5)operating free-air temperature:0 to 70;(6)power dissipation:500mW.Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.Application areas include transducer amplifiers,DC gain blocks and all the conventional op-amp circuits which now can be more easily implemented in single power supply systems. For example, these circuits can be directly supplied with the standard +5V which is used in logic systems and will easily provide the required interface electronics without requiring any additional power supply.