Features: Input offset voltage 0.6mVInput offset current 1nAInput bias current 3nACommon-mode input voltage range 0V to VS−1VPower supply current 150µAApplication Low cost charging circuitryPower supplies and adaptersPinoutSpecifications Gain Bandwidth 1 MHz Channels 2 Channe...
LM432: Features: Input offset voltage 0.6mVInput offset current 1nAInput bias current 3nACommon-mode input voltage range 0V to VS−1VPower supply current 150µAApplication Low cost charging circu...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

| Gain Bandwidth | 1 MHz |
| Channels | 2 Channels |
| Input OutputType | Vcm to V-, Not R-R Out |
| Slew Rate | 0.5 Volts/usec |
| Supply Min | 2.5 Volt |
| Supply Max | 16 Volt |
| Offset Voltage max, 25C | 4 mV |
| Supply Current Per Channel | 0.075 mA |
| PowerWise Rating 2 | 75 uA/MHz |
| Max Input Bias Current | 50 nA |
| Output Current | 11 mA |
| Voltage Noise | 50 nV/root(Hz) |
| Shut down | No |
| Special Features | With 2.5V Reference |
| Function | Op Amp |
| Temperature Min | -40 deg C |
| Temperature Max | 85 deg C |
| PowerWise | Yes |
| View Using Catalog | |
|
Suppy Voltage (VS) |
20V −65°C to 150°C 150°C 2kV −0.3V to 20V |
The LM432 integrates two operational amplifiers and one 2.5V reference. The reference is based on the LMV431 adjustable shunt regulator with the output voltage adjusted to a fixed 2.5V. The Op Amps are similar to the LM358 with a common-mode input range that includes ground. Integrating the reference and Op Amps creates a solution for low cost charging applications.