Purchase LM6132 Dual, In-stock LM6132 Dual From SeekIC.


Part Number: LM6132 Dual
Description: The LM6132/34 provides new levels of speed vs power performance in applications where low voltage supp...


Description: The LM6132/34 provides new levels of speed vs power performance in applications where low voltage supp...
The LM6132/34 provides new levels of speed vs power performance in applications where low voltage supplies or
power limitations previously made compromise necessary. With only 360 µA/amp supply current, the 10 MHz
gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life.
The LM6132/34 can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The LM6132/34 can also drive\ large capacitive loads without oscillating.
Operating on supplies from 2.7V to over 24V, the LM6132/34 is excellent for a very wide range of applications, from battery operated systems with large bandwidth requirements to high speed instrumentation.
ESD Tolerance ...............................................2500V
Differential Input Voltage ...................................15V
Voltage at Input/Output Pin ...(V+)+0.3V, (V−)−0.3V
Supply Voltage (V+V−) .....................................35V
Current at Input Pin ....................................±10 mA
Current at Output Pin ..................................±25 mA
Current at Power Supply Pin ...........................50 mA
Lead Temp. (soldering, 10 sec.) ......................260°C
Storage Temperature Range .........−65°C to +150°C
Junction Temperature .....................................150°C
Supply Voltage .................................1.8V VS 24V
LM6132, LM6134 .......................−40°C TJ +85°C
N Package, 8-pin Molded DIP ......................115°C/W
M Package, 8-pin Surface Mount .................193°C/W
N Package, 14-pin Molded DIP ......................81°C/W
M Package, 14-pin Surface Mount ...............126°C/W
LM60
PDF/DataSheet Download








