Features: `Two 5V regulated outputs:- 350 mA, 2% Main output- 80 mA, 1.5% Tracking output`Good EMI (1 MHz to 400 MHz, BCI) immunity`Separate ON/OFF and Keep-Alive control inputs`Less than 100 µA quiescent current in OFF state`Programmable delayed reset output`Input transient protection over ...
LM9072: Features: `Two 5V regulated outputs:- 350 mA, 2% Main output- 80 mA, 1.5% Tracking output`Good EMI (1 MHz to 400 MHz, BCI) immunity`Separate ON/OFF and Keep-Alive control inputs`Less than 100 µ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
`Automotive module supply power conditioning
`Remote sensor biasing
`Ratiometric to supply sensor detection
`Continuous operation for save routines and EPROM programming after power down command
`Safety related systems-EMC operational
Input Min Voltage | 5.5 Volt |
Input Max Voltage | 27 Volt |
Channels | 2 Channels |
Output Accuracy | 2 % |
Output1 VoutMin | 5 Volt |
Output1 VoutMax | 5 Volt |
Output1 IoutMax | 350 mA |
Output1 Topology | LDO |
Output2 VoutMin | 5 Volt |
Output2 VoutMax | 5 Volt |
Output2 IoutMax | 80 mA |
Output2 Topology | LDO |
Dropout Voltage | 0.8 Volt |
Quiescent Current | 15 mA |
On/Off Pin | Yes |
Error Flag | Yes |
Output Range | 5V |
Temperature Min | -40 deg C |
Temperature Max | 125 deg C |
Topology | LDO Dual |
Multiple Output Capability | Yes |
RegType | LDO |
Step-Down | Yes |
Adjustable Output | No |
View Using Catalog |
The LM9072 is a high performance voltage regulator system with operational and protection features that address many requirements of automotive applications. Two regulated outputs are provided.
The main regulator provides a precision 2% maximum tolerance 5V output at 350 mAwith a low dropout characteristic.
The second regulator provides a 5V output that tracks the main regulator output voltage within 1.5% with load currents up to 80 mA.
The tracking output is ideal for use in powering remotely located sensors with outputs that are ratiometric to the main system supply. This output is fully protected from short circuits to ground or the unregulated input supply (ignition or battery potentials in automotive applications).
The LM9072 also contains a programmable delayed system reset output. Two control inputs are provided. An ON/OFF input intended for connection to an ignition switch, and a Keep Alive input to allow a system to remain powered after ignition has been switched OFF. For EMC concerns the LM9072 remains fully operational and does not generate false rest signals while subjected to, 1 MHz to 400 MHz bulk current injection signals greater than 100 mA on the input supply and tracking output lines.