Features: (Typical unless otherwise noted) Low power consumption (max): IS = 10 µA/comp Wide range of supply voltages: 2.7V to 15V Rail-to-Rail Input Common Mode Voltage Range Open drain output Short circuit protection: 40 mA Propagation delay (@VS = 5V, 100 mV overdrive): 5 µsApplicat...
LMC6772: Features: (Typical unless otherwise noted) Low power consumption (max): IS = 10 µA/comp Wide range of supply voltages: 2.7V to 15V Rail-to-Rail Input Common Mode Voltage Range Open drain outpu...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $7.52 - 10.67 / Piece
Operational Amplifiers - Op Amps ULTRA ULTRA-LOW INPUT CURRENT AMP
Response Time | 4 us |
Output Bus | Open Drain |
Supply Min | 2.7 Volt |
Supply Max | 15 Volt |
Channels | 2 Channels |
Offset Voltage max, 25C | 15, 5 mV |
Output Current | 45 mA |
Input Range | R-R Input |
Supply Current Per Channel | 0.006 mA |
PowerWise Rating 3 | 24 uA x us |
Max Input Bias Current | 0.001 nA |
Special Features | Undefined |
Temperature Min | -40 deg C |
Temperature Max | 85 deg C |
Function | Comparator |
Automotive Selection Guide | Yes |
View Using Catalog |
The LMC6772 is an ultra low power dual comparator with a maximum 10 A/comparator power supply current. It is designed to operate over a wide range of supply voltages, with a minimum supply voltage of 2.7V.
The common mode voltage range of the LMC6772 exceeds both the positive and negative supply rails, a significant advantage in single supply applications. The open drain output of the LMC6772 allows for wired-OR configurations. The open drain output also offers the advantage of allowing the output to be pulled to any voltage rail up to 15V, regardless of the supply voltage of the LMC6772.
The LMC6772 is targeted for systems where low power consumption is the critical parameter. Guaranteed operation at supply voltages of 2.7V and rail-to-rail performance makes this comparator ideal for battery-powered applications.
Refer to the LMC6762 datasheet for a push-pull output stage version of this device.
Reliability Metrics
Part Number | Process | EFR Reject | EFR Sample Size | PPM | LTA Rejects | LTA Device Hours | FITS | MTTF (Hours) |
LMC6772AIM | P2CMOS | 0 | 48295 | 0 | 1 | 4172500 | 2 | 536440139 |
LMC6772AIMM | P2CMOS | 0 | 48295 | 0 | 1 | 4172500 | 2 | 536440139 |
LMC6772AIMMX | P2CMOS | 0 | 48295 | 0 | 1 | 4172500 | 2 | 536440139 |
LMC6772AIMX | P2CMOS | 0 | 48295 | 0 | 1 | 4172500 | 2 | 536440139 |
LMC6772BIM | P2CMOS | 0 | 48295 | 0 | 1 | 4172500 | 2 | 536440139 |
LMC6772BIMX | P2CMOS | 0 | 48295 | 0 | 1 | 4172500 | 2 | 536440139 |
LMC6772BIN | P2CMOS | 0 | 48295 | 0 | 1 | 4172500 | 2 | 536440139 |
LMC6772QMM | P2CMOS | 0 | 48295 | 0 | 1 | 4172500 | 2 | 536440139 |
LMC6772QMMX | P2CMOS | 0 | 48295 | 0 | 1 | 4172500 | 2 | 536440139 |
Design Tools
Title | Size in Kbytes | Date | |||
Amplifiers Selection Guide software for Windows | 8 Kbytes | 6-Mar-2007 | View |
If you have trouble printing or viewing PDF file(s), see Printing Problems. |
Application Notes
Title | Size in Kbytes | Date | |
AN-1331: Application Note 1331 LM5033 Evaluation Board | 507 Kbytes | 27-May-04 | Download |
If you have trouble printing or viewing PDF file(s), see Printing Problems. |