Features: Gain-Bandwidth Product: 5MHz Typ
Slew Rate: 3V/ms Typ
Low Supply Current per Amplifier: 0.55mA Max
Input Offset Voltage: 180mV Max
Input Offset Voltage Drift: 3mV/°C Max
Input Offset Current: 20nA Max
Input Bias Current: 100nA Max
Open-Loop Gain: 1500V/mV Min (VS = ±15V)
Low Input Noise Voltage: 16.5nV/ÖHz
Low Input Noise Current: 0.14pA/ÖHz
Large Output Drive Current: 20mA Min
Single Supply Operation Input Voltage Range Includes Ground Output Swings to Ground While Sinking Current
Wide Supply Voltage Range: 2.5V to 36V
Specified on 3.3V, 5V and ±15V
Dual in 8-Pin PDIP and SO Package
Quad in a Narrow 16-Pin SO PackageApplicationBattery-Powered Systems Portable Instrumentation
Active Filters
Photodiode Amplifiers
DAC Current to Voltage AmplifiersPinout
SpecificationsTotal Supply Voltage (V+ to V) .................................. 36V
Input Current ........................................................ ±15mA
Output Short-Circuit Duration (Note 1) ............Continuous
Operating Temperature Range .............. 40°C to 85°C
Specified Temperature Range (Note 2) .....40°C to 85°C
Junction Temperature .............................................. 150°C
Storage Temperature Range ................. 65°C to 150°C
Lead Temperature (Soldering, 10 sec)..................... 300°C
Description
The LT®1492/LT1493 are dual/quad, low power, single supply precision op amps with 5MHz gain-bandwidth product, 3V/ms slew rate and only 450mA of quiescent supply current per amplifier. With a maximum input offset voltage of only 180mV, the LT1492/LT1493 eliminate trims in most systems while providing high frequency performance not usually found in low power single supply amplifiers.
The LT1492/LT1493 will operate on any supply greater than 2.5V and less than 36V total, and are specified on single 3.3V, single 5V and ±15V supplies. Even with their low quiescent supply current the minimum output drive is 20mA, ideal for driving low impedance loads. The inputs can be driven beyond the supplies without damage or phase reversal of the output.
The low operating voltage and wide input and output range make the LT1492/ LT1493 amplifiers ideal for battery-powered applications. For applications requiring faster precision single supply amplifiers, see the 14MHz, 7V/ms LT1211/LT1212, the 28MHz, 12V/ms LT1213/LT1214 or the 23MHz, 50V/ms LT1215/LT1216.
LT1493 Data Sheet
