M51132FP General Description
M51132FP Features
• Two control modes can be selected.
(Left/right independent volume control mode or left/right simultaneous volume + balance control mode.)
• Pass through switch is included to output the input signal as it is, irrespective of the volume/balance control voltages.
• Shock noise reduction pin is provided to reduce pass through switch on/off shock noise.
• Built-in reference supply voltage circuit: output current 10 mA (Typ.)
• Maximum input: 3.4 Vrms (Typ.) (f = 1 kHz, THD = 1%)
• Low distortion: 0.005% (Typ.)
• Good channel separation: 102 dB (Typ.) (f = 1 kHz, Vo = 2 Vrms, IHF-A)
M51132FP Connection Diagram

- ·M5106
- ETC [ETC]
- 6 SEC VOICE
- 102257 KB

- ·M5109
- ETC [ETC]
- 9 SEC VOICE
- 102300 KB

- ·M51131L
- MITSUBISHI [Mitsubishi Electric Semiconductor]
- 2 CHANNEL ELECTRONIC VOLUME BALANCE
- 548974 KB

- ·M51132
- Renesas Technology
- 2ch Electronic Volume Balance
- 350475 KB

- ·M51132L
- RENESAS [Renesas Technology Corp]
- 2ch Electronic Volume Balance
- 350475 KB

- ·M51134FP
-
- BASS EMPHASIS CIRCUIT,SOP,20PIN,PLASTIC
- 171526 KB

- ·M51134P
-
- BASS EMPHASIS CIRCUIT,DIP,20PIN,PLASTIC
- 171526 KB

- ·M51137FP
-
- TONE/VOLUME/BALANCE CONTROL,BICMOS,SOP,42PIN,PLASTIC
- 444965 KB

Map list: ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789All