MAX1011EVKIT

The features of MAX1011EVKIT can be summarized as:(1)5.85 effective number of bits at 20mhz analog input frequency;(2)separate analog and digital power and ground connections with optimized pc board layout;(3)single-ended or differential analog input;(4)square-pin header for easy connection of logic analyzer to digital outputs;(5)user-selectable adc full-scale gain ranges;(6) fully assembled and tested surface-mount board.

The EV Kit jumpers and default positions of the MAX1011EVKIT can be summarized as:(1):the jumper is JU1,JU2,JU6,the function is power-supply currentsense ports,the default position is shorted with 0 resistors;(2):the jumper is JU3, JU4,the function is offset-correction amplifier enabled,the default position is open;(3):the jumper is JU5,the function is ADC full-scale range selection,the default position is open.

The external clock source EV Kit modifications of the MAX1011EVKIT can be summarized as:(1):the component is clock overdrive (J2),the description is clock input BNC connector,the modification is add;(2):the component is C6,the description is 5pF capacitor,the modification is remove;(3):the component is C7, C8,the description is 47pF capacitors,the modification is replace with 0.01F capacitors;(4):the component is L1,the description is 220nH inductor,the modification is remove;(5):the component is R1,the description is 10k resistor,the modification is remove;(6):the component is R2, R3,the description is 47k resistor,the modification is replace with 49.9 resistors;(7):the component is D1,the description is varactor diode,the modification is remove.