MAX1452 General Description
The MAX1452 is a highly integrated analog-sensor sig-nal processor optimized for industrial and process con-trol applications utilizing resistive element sensors.The MAX1452 provides amplification, calibration, and temperature compensation that enables an overall per-formance approaching the inherent repeatability of the sensor. The fully analog signal path introduces no quantization noise in the output signal while enabling digitally controlled trimming with the integrated 16-bit DACs. Offset and span are calibrated using 16-bit DACs, allowing sensor products to be truly inter-changeable.
The MAX1452 architecture includes a programmable sensor excitation, a 16-step programmable-gain ampli-fier (PGA), a 768-byte (6144 bits) internal EEPROM,four 16-bit DACs, an uncommitted op amp, and an on-chip temperature sensor. In addition to offset and span compensation. The MAX1452 provides a unique tem-perature compensation strategy for offset TC and FSOTC that was developed to provide a remarkable degree of flexibility while minimizing testing costs.
The MAX1452 is packaged for the commercial, industri-al, and automotive temperature ranges in 16-pin SSOP packages.
MAX1452 Maximum Ratings
Supply Voltage, VDD to VSS..............................................-0.3V, +6V
All Other Pins ........................................(VSS - 0.3V) to (VDD + 0.3V)
Short-Circuit Duration, FSOTC, OUT, BDR,
AMPOUT .....................................................................Continuous
Continuous Power Dissipation (TA = +70°C)
16-Pin SSOP (derate 8.00mW/°C above +70°C) ............640mW
Operating Temperature:
MAX1452CAE/MAX1452C/D ...................................0°C to +70°C
MAX1452EAE ......................................................-40°C to +85°C
MAX1452AAE ....................................................-40°C to +125°C
Junction Temperature...........................................................+150°C
Storage Temperature............................................-65°C to +150°C
Lead Temperature (soldering, 10s) ..................................... +300°C
MAX1452 Features
Provides Amplification, Calibration, and Temperature Compensation
Accommodates Sensor Output Sensitivities from 1mV/V to 40mV/V
Single Pin Digital Programming
No External Trim Components Required
16-Bit Offset and Span Calibration Resolution
Fully Analog Signal Path
On-Chip Lookup Table Supports Multipoint Calibration Temperature Correction
Supports Both Current and Voltage Bridge Excitation
Fast 3.2kHz Frequency Response
On-Chip Uncommitted Op Amp
Secure-Lock™ Prevents Data Corruption
Low 2mA Current Consumption
MAX1452 Typical Application
Pressure Sensors
Transducers and Transmitters
Strain Gauges
Pressure Calibrators and Controllers
Resistive Elements Sensors
Accelerometers
Humidity Sensors
MAX1452 Connection Diagram
Map list: ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789All