Purchase MAX1480C, In-stock MAX1480C From SeekIC.
Part Number: MAX1480C
Description: The MAX1480A/MAX1480B/MAX1480C/MAX1490A/MAX1490B are complete, electrically isolated, RS-485/RS-422 data-communications...
- Table of contents:
MAX1480C
-
Suppliers
DataSheet
General Description
MAX1480C General Description
The MAX1480A/MAX1480B/MAX1480C/MAX1490A/MAX1490B are complete, electrically isolated, RS-485/RS-422 data-communications interface solutions in a hybrid microcircuit. Transceivers, optocouplers, and a transformer provide a complete interface in a standard DIP package. A single +5V supply on the logic side powers both sides of theinterface.
The MAX1480B/MAX1480C/MAX1490B feature reduced-slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission at data rates up to 250kbps.
The MAX1480A/MAX1490A driver slew rate is not limited,allowing transmission rates up to 2.5Mbps. TheMAX1480A/B/C are designed for half-duplex communication, while the MAX1490A/B feature full-duplex communication.
Drivers are short-circuit current limited and protected against excessive power dissipation by thermal shut-down circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a known output (RO low for the MAX1480A/B/C, RO high for the MAX1490A/B/C) if the input is open circuit.
The MAX1480A/MAX1480B/MAX1480C/MAX1490A/MAX1490B typically withstand 1600VRMS (1 minute) or 2000VRMS (1 second). Their isolated outputs meet all RS-485/RS-422 specifications. The MAX1480A/B/C are available in a 28-pin DIP package, and the MAX1490A/B are available in a 24-pin DIP package.
MAX1480C Maximum Ratings
With Respect to GND_
Supply Voltage (VCC_)..............................................-0.3V to +6V
Control Input Voltage (SD, FS)..................-0.3V to (VCC_ + 0.3V)
Receiver Output Voltage (RO, RO).............-0.3V to (VCC_ + 0.3V)
Output Switch Voltage (D1, D2)...........................................+12V
With Respect to ISO COM_
Control Input Voltage (ISO DE_ ) .......-0.3V to (ISO VCC_ + 0.3V)
Driver Input Voltage (ISO DI_ ) ..........-0.3V to (ISO VCC_ + 0.3V)
Receiver Output Voltage (ISO RO_) ...-0.3V to (ISO VCC_ + 0.3V)
Driver Output Voltage (A, B, Y, Z ) ..........................-8V to +12.5V
Receiver Input Voltage (A, B)..................................-8V to +12.5V
LED Forward Current (DI, DE, ISO RO LED) .........................50mA
Continuous Power Dissipation (TA = +70°C)
24-Pin Plastic DIP (derate 8.7mW°C above +70°C) .......696mW
28-Pin Plastic DIP (derate 9.09mW/°C above +70°C) ....727mW
Operating Temperature Ranges
MAX1480_CPI/MAX1490_CPG.................................0°C to +70°C
MAX1480_EPI/MAX1490_EPG .............................-40°C to +85°C
Storage Temperature Range ............................-65°C to +160°C
Lead Temperature (soldering, 10s) ..................................+300°C
Supply Voltage (VCC_)..............................................-0.3V to +6V
Control Input Voltage (SD, FS)..................-0.3V to (VCC_ + 0.3V)
Receiver Output Voltage (RO, RO).............-0.3V to (VCC_ + 0.3V)
Output Switch Voltage (D1, D2)...........................................+12V
With Respect to ISO COM_
Control Input Voltage (ISO DE_ ) .......-0.3V to (ISO VCC_ + 0.3V)
Driver Input Voltage (ISO DI_ ) ..........-0.3V to (ISO VCC_ + 0.3V)
Receiver Output Voltage (ISO RO_) ...-0.3V to (ISO VCC_ + 0.3V)
Driver Output Voltage (A, B, Y, Z ) ..........................-8V to +12.5V
Receiver Input Voltage (A, B)..................................-8V to +12.5V
LED Forward Current (DI, DE, ISO RO LED) .........................50mA
Continuous Power Dissipation (TA = +70°C)
24-Pin Plastic DIP (derate 8.7mW°C above +70°C) .......696mW
28-Pin Plastic DIP (derate 9.09mW/°C above +70°C) ....727mW
Operating Temperature Ranges
MAX1480_CPI/MAX1490_CPG.................................0°C to +70°C
MAX1480_EPI/MAX1490_EPG .............................-40°C to +85°C
Storage Temperature Range ............................-65°C to +160°C
Lead Temperature (soldering, 10s) ..................................+300°C
MAX1480C Features
For Integrated ESD Protection
MAX1480E/MAX1490E: ±15kV ESD-Protected,Isolated RS-485/RS-422 Data Interfaces
For Space-Constrained Applications
MAX3157: High CMRR, RS-485 Transceiver with ±50V Isolation
MAX1480E/MAX1490E: ±15kV ESD-Protected,Isolated RS-485/RS-422 Data Interfaces
For Space-Constrained Applications
MAX3157: High CMRR, RS-485 Transceiver with ±50V Isolation
MAX1480C Typical Application
Isolated RS-485/RS-422 Data Interface
Transceivers for EMI-Sensitive Applications
Industrial-Control Local Area Networks
Automatic Test Equipment
HVAC/Building Control Networks
Transceivers for EMI-Sensitive Applications
Industrial-Control Local Area Networks
Automatic Test Equipment
HVAC/Building Control Networks
MAX1480C Connection Diagram
MAX1480C
PDF/DataSheet Download
- Datasheet: MAX1480C
- File Size: 502586 KB
- Manufacturer: MAXIM [Maxim Integrated Products]
- Click here to Download
- ·MAX002
- FILTRONIC [Filtronic Compound Semiconductors]
- Optical Communications - Modulator Driver Amplifier
- 42133 KB
- ·MAX038
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038C/D
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038CPP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038CWP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038EPP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038EVKIT
- Maxim
- Evaluation Kit for the MAX038
- 106491 KB
- ·MAX038EWP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
MAX1480C Relative Products
MAX1480BEPI+
The MAX1480BEPI+ is one member of the MAX1480B series.The MAX1480B is complete, electrically isolated, RS-485/RS-422 data-communication interface solution in a hybrid microcircuit.Transceivers, optocouplers, and a transformer provide a complete interface in ...
MAX1480BEPI
IC RS485/RS422 DATA INTRFC 28DIP
MAX1480BCPI+
The MAX1480BCPI+ is one member of the MAX1480B series.The MAX1480B is complete,electrically isolated, RS-485/RS-422 data-communications interface solutions in a hybrid microcircuit. Transceivers, optocouplers, and a transformer provide a complete interface i...
MAX1480BCPI
The MAX1480BCPI is designed as one kind of complete, isolated RS-485 / RS-422 data interface device that belongs to the MAX1480 family. This device can be used in wide range of applications such as (1)isolated RS-485 / RS-422 data interface; (2)transceivers ...
MAX1480B
The MAX1480A/MAX1480B/MAX1480C/MAX1490A/MAX1490B are complete, electrically isolated, RS-485/RS-422 data-communications interface solutions in a hybrid microcircuit. Transceivers, optocouplers, and a transformer provide a complete interface in a standard DIP...
.jpg)
MAX1480AEPI+
IC INTERFACE RS485/RS422 28-DIP
Hotspot Suppliers Product
PIC18F4550-I/P
Price: 3.3-4 USD
High-Performance, Enhanced Flash USB Microcontroller, DIP40, Low-speed, 1.5 Mb/s
ATMEGA32L-8AU
Price: 2-4 USD
IC AVR MCU 32K 8MHZ 3V 44TQFP - ATMEGA32L-8AU
ATMEGA644PA-AU
Price: 3-3.5 USD
low-power CMOS 8-bit microcontroller, 20 MHz, 64KB, 44TQFP, 1.8 - 5.5V, 0.4 mA
AD8021ARZ
Price: 1.6-2 USD
voltage feedback amplifier, SOP, 26.4 V
K9F1208UOB-PCB0
Price: 1-1 USD
64M x 8 Bit, NAND Flash Memory , TSOP-48
LM310N
Price: 0.9-1.1 USD
DIP, voltage follower, monolithic operational amplifier, 10 nA, ±18V
74HC74AP
Price: 0.125-0.1667 USD
high speed CMOS D FLIP FLOP, DIP, -0.5 to 7 V, ±25 mA, 500mW, Low power dissipation, High noise im...
INA146UA/2K5
Price: 1.78-2.06 USD
precision difference amplifier, 8SOIC, 550kHz, 4.5 V ~ 36 V, 15mA, RoHS Compliant
MT46V16M16P-75:F
Price: 3.6-3.8 USD
double data rate SDRAM, +2.5V, 333 Mb/s/p data rate, 167 MHz Clock
TPS61043DRBRG4
Price: 0.65-0.9 USD
boost converter, QFN, -0.3 V to 7 V
74LVX4245MTCX
Price: 0.2-0.8 USD
TXRX 8-BIT DUAL 3STATE 24TSSOP - 74LVX4245MTCX
XC9572-15PQ100C
Price: 1.7-1.85 USD
programmable CPLD, QFP, 125 MHz
