Purchase MAX4565, In-stock MAX4565 From SeekIC.
Part Number: MAX4565
Description: The MAX4565/MAX4566/MAX4567 are low-voltageT-switches designed for switching RF and video signalsfrom ...
- Table of contents:
MAX4565
-
Suppliers
DataSheet
General Description
MAX4565 General Description
The MAX4565/MAX4566/MAX4567 are low-voltageT-switches designed for switching RF and video signalsfrom DC to 350MHz in 50 and 75 systems. TheMAX4565 contains four normally open single-pole/singlethrow(SPST) switches. The MAX4566 contains two dualSPST switches (one normally open, one normally closed.)The MAX4567 contains two single-pole/double-throw(SPDT) switches.
Each switch is constructed in a "T" configuration, ensuringexcellent high-frequency off isolation and crosstalk of-83dB at 10MHz. They can handle Rail-to-Rail® analog signalsin either direction. On-resistance (60 max) ismatched between switches to 2.5 max and is flat (2max) over the specified signal range, using ±5V supplies.The off leakage current is less than 5nA at +25 and50nA at +85.
These CMOS switches can operate with dual power suppliesranging from ±2.7V to ±6V or a single supplybetween +2.7V and +12V. All digital inputs have 0.8V/2.4Vlogic thresholds, ensuring both TTL- and CMOS-logic compatibilitywhen using ±5V or a single +5V supply.
MAX4565 Maximum Ratings
(Voltages Referenced to GND)
V+...........................................................................-0.3V, +13.0V
V- ...........................................................................-13.0V, +0.3V
V+ to V-..................................................................-0.3V, +13.0V
All Other Pins (Note 1) ..........................(V- - 0.3V) to (V+ + 0.3V)
Continuous Current into Any Terminal..............................±25mA
Peak Current into Any Terminal
(pulsed at 1ms, 10% duty cycle)......................................±50mA
ESD per Method 3015.7 ..................................................>2000V
Continuous Power Dissipation (TA = +70) (Note 2)
16-Pin Plastic DIP
(derate 10.53mW/ above +70)..................................842mW
16-Pin Narrow SO
(derate 8.70mW/ above +70)....................................696mW
16-Pin QSOP (derate 8.3mW/ above +70)................ 667mW
20-Pin Plastic DIP (derate 8.0mW/ above +70) ........640mW
20-Pin Wide SO (derate 10.00mW/ above +70) ...... 800mW
20-Pin SSOP (derate 8.0mW/ above +70) ............... 640mW
Operating Temperature Ranges
MAX456_C_ E ..........................................................0 to +70
MAX456_E_ E .......................................................-40 to +85
Storage Temperature Range ............................. -65 to +150
Lead Temperature (soldering, 10sec) ..............................+300
V+...........................................................................-0.3V, +13.0V
V- ...........................................................................-13.0V, +0.3V
V+ to V-..................................................................-0.3V, +13.0V
All Other Pins (Note 1) ..........................(V- - 0.3V) to (V+ + 0.3V)
Continuous Current into Any Terminal..............................±25mA
Peak Current into Any Terminal
(pulsed at 1ms, 10% duty cycle)......................................±50mA
ESD per Method 3015.7 ..................................................>2000V
Continuous Power Dissipation (TA = +70) (Note 2)
16-Pin Plastic DIP
(derate 10.53mW/ above +70)..................................842mW
16-Pin Narrow SO
(derate 8.70mW/ above +70)....................................696mW
16-Pin QSOP (derate 8.3mW/ above +70)................ 667mW
20-Pin Plastic DIP (derate 8.0mW/ above +70) ........640mW
20-Pin Wide SO (derate 10.00mW/ above +70) ...... 800mW
20-Pin SSOP (derate 8.0mW/ above +70) ............... 640mW
Operating Temperature Ranges
MAX456_C_ E ..........................................................0 to +70
MAX456_E_ E .......................................................-40 to +85
Storage Temperature Range ............................. -65 to +150
Lead Temperature (soldering, 10sec) ..............................+300
MAX4565 Features
High 50Off Isolation: -83dB at 10MHz
Low 50 Crosstalk: -87dB at 10MHz
DC to 350MHz -3dB Signal Bandwidth
60 Signal Paths with ±5V Supplies
2.5Signal-Path Matching with ±5V Supplies
2 Signal-Path Flatness with ±5V Supplies
Low 50 Insertion Loss: 2.5dB at 100MHz
±2.7V to ±6V Dual Supplies+2.7V to +12V Single Supply
Low Power Consumption: <1µW
Rail-to-Rail Bidirectional Signal Handling
Pin Compatible with Industry-Standard DG540,DG542, DG643
>2kV ESD Protection per Method 3015.7
TTL/CMOS-Compatible Inputswith Single +5V or ±5V
MAX4565 Typical Application
RF Switching
Video Signal Routing
High-Speed Data Acquisition
Test Equipment
ATE Equipment
Video Signal Routing
High-Speed Data Acquisition
Test Equipment
ATE Equipment
MAX4565 Connection Diagram
MAX4565
PDF/DataSheet Download
- Datasheet: MAX4565
- File Size: 170167 KB
- Manufacturer: Maixm
- Click here to Download
- ·MAX002
- FILTRONIC [Filtronic Compound Semiconductors]
- Optical Communications - Modulator Driver Amplifier
- 42133 KB
- ·MAX038
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038C/D
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038CPP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038CWP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038EPP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038EVKIT
- Maxim
- Evaluation Kit for the MAX038
- 106491 KB
- ·MAX038EWP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
MAX4565 Relative Products
MAX4564EUA+T
IC ANLG SW SPDT DUAL LV 8-UMAX
MAX4564EUA+
IC ANLG SW SPDT DUAL LV 8-UMAX
MAX4564EKA+T
IC ANLG SW SPDT DUAL LV SOT23-8
MAX4564
The MAX4564 is a low-voltage, dual-supply, singlepole/ double-throw (SPDT) analog switch designed to operate from dual ±1.8V to ±6V or single +1.8V to +12V supplies. The low on-resistance (RON = 40 at ±5V) and low power consumption (5W) make this part ideal ...
MAX4563EEE+T
IC AUD/VID SWITCH SPI SER 16QSOP
-
MAX4563EEE+
IC AUD/VID SWITCH SPI SER 16QSOP
Hotspot Suppliers Product
ACS402-5SB4
Price: 1.9-2.5 USD
quad AC line switch array, DIP20, 500V, Avalanche controlled device, 0.2A
108-046F
Price: 10-12 USD
108-046F, TO-3, Integrated Circuits
TLC2543IN
Price: 7-12 USD
IC 12-BIT A/D W/SER CNTRL 20-DIP - TLC2543IN
TL032IDR
Price: 0.31-0.4 USD
JFET-input operational amplifier, SOP-8, 18 V, 160 mA, Low Power Consumption
BC817-40LT1G
Price: 0.015-0.045 USD
TRANS NPN GP 500MA 45V SOT23 - BC817-40LT1G
2SK214
Price: 0.8-1.6 USD
Silicon N-Channel MOS FET, TO-220, 160V, 0.5A, High forward transfer admittance
2SB772-AZ
Price: 0.01-0.02 USD
2SB772-AZ, DIP, NEC, PNP silicon transistor, 1.0W, 40V, Low saturation voltage
CS4272-CZZ
Price: 4-4.5 USD
integrated audio CODEC, 24BIT, 114DB, 28TSSOP, 4.75 V ~ 5.25 V
UDN2595A
Price: 5.8-11.5 USD
saturated sink driver, DIP, 200mA
AT93C46D-PU
Price: 0.25-0.4 USD
Three-wire EEPROM, DIP, -1.0V to +7.0V
MC34063
Price: 0.1-1 USD
switching regulator, DIP, MC34063, ON Semiconductor, 50 V, 100 mA, 100KHz
LTA303P
Price: 0.59-0.78 USD
LTA303P, SOP8, Philips Electronics India Limited
