Purchase MAX4632, In-stock MAX4632 From SeekIC.
Part Number: MAX4632
Description: The MAX4631/MAX4632/MAX4633 high-voltage, dual analog switches are pin compatible with the industry-st...
- Table of contents:
MAX4632
-
Suppliers
DataSheet
General Description
MAX4632 General Description
The MAX4631/MAX4632/MAX4633 high-voltage, dual analog switches are pin compatible with the industry-standard DG401/DG403/DG405. They upgrade the existing devices with fault-protected inputs and Rail-to-Rail® signal handling capabilities. The MAX4631/MAX4632/MAX4633's normally open (NO) and normally closed (NC) terminals are protected from overvoltage faults up to 36V during power-up or power-down. During a fault condition, these terminals become open circuit and only nanoamperes of leakage current flow from the source, yet the switch output (COM_) continues to furnish up to 18mA of the appropriate polarity supply voltage to the load. This ensures unambiguous rail-to-rail outputs when a fault begins and ends.
On-resistance is 85½ (max) at +25°C and is matched between switches to 6½ (max). Off-leakage current is only 0.5nA at +25°C and 5nA at +85°C.
The MAX4631 has two NO single-pole/single-throw (SPST) switches. The MAX4632 has two NO/NC single-pole/ double-throw (SPDT) switches. The MAX4633 has two NO double-pole/single-throw (DPST) switches.
These CMOS switches operate with dual power supplies ranging from ±4.5V to ±18V or a single supply between +9V and +36V. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring both TTL- and CMOS-logic compatibility when using ±15V or a single +12V supply.
MAX4632 Maximum Ratings
(Voltages referenced to GND)
V+..................................................................................................-0.3V to +44V
V- ..................................................................................................-44V to +0.3V
V+ to V-..........................................................................................-0.3V to +44V
COM_, IN_ (Note 1) ......................................................(V- - 0.3V) to (V+ + 0.3V)
NC_, NO_ (Note 2)
MAX4631_ _E .................................................................(V+ - 36V) to (V- + 36V)
MAX4632_ _E .................................................................(V+ - 25V) to (V- + 25V)
MAX4633_ _E .................................................................(V+ - 36V) to (V- + 36V)
NC_, NO_ to COM_
MAX4631_ _E ..................................................................................-36V to +36V
MAX4632_ _E ..................................................................................-25V to +25V
MAX4633_ _E ..................................................................................-36V to +36V
Continuous Current into Any Terminal.......................................................±30mA
Peak Current into Any Terminal (pulsed at 1ms,
10% duty cycle)........................................................................................±50mA
Continuous Power Dissipation (TA = +70°C) (Note 2)
Plastic DIP (derate 10.53mW/°C above +70°C) ....................................842mW
Narrow SO (derate 8.70mW/°C above +70°C) ......................................696mW
CERDIP (derate 10.00mW/°C above +70°C)...........................................842mW
Operating Temperature Ranges
MAX463_C_E .................................................................................0°C to +70°C
MAX463_E_E ..............................................................................-40°C to +85°C
MAX463_M_E ............................................................................-55°C to +125°C
Storage Temperature Range ....................................................-65°C to +150°C
Lead Temperature (soldering, 10sec) .......................................................+300°C
Note 1: COM_ and IN_ pins are not fault protected. Signals on COM_ to IN_ exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maximum current rating.
Note 2: NC_ and NO_ pins are fault protected (see Electrical Characteristics). With power applied to V+ or V-, signals on NC_ or NO_ exceeding ±25V (MAX4632) or ±36V (MAX4631/MAX4633) may damage the device. With V+ = V- = 0, signals on NC_ or NO_ exceeding ±40V may damage the device.
MAX4632 Features
Fault Protection ±40V with Power Off ±36V with ±15V Supplies (MAX4631/MAX4633) ±25V with ±15V Supplies (MAX4632)
Rail-to-Rail Signal Handling
No Power-Supply Sequencing Required
All Switches Off with Power Off
Output Clamped to Appropriate Supply Voltage During Fault Condition; No Transition Glitch
85½ (max) Signal Paths with ±15V Supplies
±4.5V to ±18V Dual Supplies +9V to +36V Single Supply
Low Power Consumption: <6mW
Pin Compatible with Industry-Standard DG401/DG403/DG405
TTL- and CMOS-Logic Compatible Inputs with Single +9V to +15V, or ±15V Supplies
MAX4632 Typical Application
ATE Equipment Data Acquisition Industrial and Process Control Systems Avionics Redundant/Backup Systems
MAX4632
PDF/DataSheet Download
- Datasheet: MAX4632
- File Size: 212466 KB
- Manufacturer: Maixm
- Click here to Download
- ·MAX002
- FILTRONIC [Filtronic Compound Semiconductors]
- Optical Communications - Modulator Driver Amplifier
- 42133 KB
- ·MAX038
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038C/D
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038CPP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038CWP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038EPP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038EVKIT
- Maxim
- Evaluation Kit for the MAX038
- 106491 KB
- ·MAX038EWP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
MAX4632 Relative Products
MAX4631EPE+
IC FAULT-PROT DUAL SW 16-DIP
MAX4631CSE+T
IC ANLG SW FAULT PRO SPST 16SOIC
-
MAX4631CSE+
IC ANLG SW FAULT PRO SPST 16SOIC
MAX4631
The MAX4631/MAX4632/MAX4633 high-voltage, dual analog switches are pin compatible with the industry-standard DG401/DG403/DG405. They upgrade the existing devices with fault-protected inputs and Rail-to-Rail® signal handling capabilities. The MAX4631/MAX4...
MAX4630EUD
IC SWITCH QUAD SPST 14TSSOP
max4630
The max4630 low-voltage, high-ESD-protected, quad, single-pole/single-throw (SPST) analog switches are pin-compatible replacements for the industry-standard 74HC4066 analog switch. The normally open (NO) and normally closed (NC) pins are protected against ±...
Hotspot Suppliers Product
TA1225
Price: 49.99-55.25 USD
RELAY SSR 25A 120VAC AC - TA1225
C8051F130-GQR
Price: 1-50 USD
C8051F130-GQR Silicon Labs Microcontrollers (MCU)
LM2575T-5.0
Price: 0.24-0.28 USD
regulator, TO-220, 2 kV
AT45DB642D-TU
Price: 3-3.5 USD
sequential access Flash memory, 64MBIT, 66MHZ, 28TSOP, 2.7V, AT45DB642D-TU
THB6016H
Price: 2-12 USD
PWM chopper-type, sinusoidal micro-step, bipolar stepping motor driver IC, 40V, 3.5A, HZIP25
TL16C554AIPNR
Price: 0.1-0.2 USD
PLCC, enhanced quadruple version, -0.5V to 7V, 80-LQFP
QM50DY-2H
Price: 40-45 USD
Mitsubishi transistor module, 50A Collector current, 1000V Collector-emitter voltage
IDT821054PQFG
Price: 3.9-3.98 USD
feature rich, single-chip, programmable 4- channel PCM CODEC, QFP64, 1.5 W, -0.5 to 5.5 V, MPI con...
EPM9320ALC84-10
Price: 60-65 USD
high performance EPLD, PLCC, in-system-programmable, –2.0 to 7.0 V, –25 to 25 mA
MC9S08AC32CFGE
Price: 1.4-1.8 USD
Microcontroller, 8BIT, 32K, 44-LQFP, –0.3V to +5.8V, ±25mA
K4F641611D-TC50
Price: 2-3 USD
4M x 16bit CMOS Dynamic RAM with Fast Page Mode
OM8373PS/N3/A/1854
Price: 12.89-17.18 USD
OM8373PS/N3/A/1854, NXP Semiconductors, DIP
