Purchase MAX5143, In-stock MAX5143 From SeekIC.
Part Number: MAX5143
Description: The MAX5141MAX5144 are serial-input, voltage-output,14-bit digital-to-analog conver...
- Table of contents:
MAX5143
-
Suppliers
DataSheet
General Description
MAX5143 General Description
The MAX5141MAX5144 are serial-input, voltage-output,14-bit digital-to-analog converters (DACs) in tiny µMAX packages, 50% smaller than comparable DACs in an 8-pin SO. They operate from low +3V (MAX5143/MAX5144) or +5V (MAX5141/MAX5142) single supplies.They provide 14-bit performance (±1LSB INL and DNL) over temperature without any adjustments. The DAC output is unbuffered, resulting in a low supply current of 120µA and a low offset error of 2LSBs.
The DAC output range is 0V to VREF. For bipolar operation, matched scaling resistors are provided in the MAX5142/MAX5144 for use with an external precision op amp (such as the MAX400), generating a ±VREF output swing.
A 16-bit serial word is used to load data into the DAC latch. The 25MHz, 3-wire serial interface is compatible with SPI™/QSPI™/MICROWIRE™, and can interface directly with optocouplers for applications requiring isolation. A power on reset circuit clears the DAC output to code 0 (MAX5141/MAX5143) or code 8192 (MAX5142/MAX5144) when power is initially applied.
A logic low on CLR asynchronously clears the DAC output to code 0 (MAX5141/MAX5143) or code 8192 (MAX5142/MAX5144), independent of the serial interface.The MAX5141/MAX5143 are available in 8-pin µMAX packages and the MAX5142/MAX5144 are available in 10-pin µMAX packages.
MAX5143 Maximum Ratings
VDD to GND....................................................-0.3V to +6V
CS, SCLK, DIN, CLR to GND ...........................-0.3V to +6V
REF to GND........................................-0.3V to (VDD + 0.3V)
OUT, INV to GND ............................................-0.3V to VDD
RFB to INV.........................................................-6V to +6V
RFB to GND........................................................-6V to +6V
Maximum Current into Any Pin...................................50mA
Continuous Power Dissipation (TA = +70)
8-Pin µMAX (derate 4.5mW/ above +70)..........362mW
10-Pin µMAX (derate 5.6mW/ above +70)........444mW
Operating Temperature Ranges
MAX514_ EUA............................................-40 to +85
MAX514_ EUB............................................-40 to +85
Storage Temperature Range .....................-65 to +150
Maximum Die Temperature.......................................+150
Lead Temperature (soldering, 10s) .........................+300
CS, SCLK, DIN, CLR to GND ...........................-0.3V to +6V
REF to GND........................................-0.3V to (VDD + 0.3V)
OUT, INV to GND ............................................-0.3V to VDD
RFB to INV.........................................................-6V to +6V
RFB to GND........................................................-6V to +6V
Maximum Current into Any Pin...................................50mA
Continuous Power Dissipation (TA = +70)
8-Pin µMAX (derate 4.5mW/ above +70)..........362mW
10-Pin µMAX (derate 5.6mW/ above +70)........444mW
Operating Temperature Ranges
MAX514_ EUA............................................-40 to +85
MAX514_ EUB............................................-40 to +85
Storage Temperature Range .....................-65 to +150
Maximum Die Temperature.......................................+150
Lead Temperature (soldering, 10s) .........................+300
MAX5143 Features
*Miniature (3mm x 5mm) 8-Pin µMAX Package
*Low 120µA Supply Current
*Fast 1µs Settling Time
*25MHz SPI/QSPI/MICROWIRE-Compatible Serial Interface
*VREF Range Extends to VDD
*+5V (MAX5141/MAX5142) or +3V (MAX5143/MAX5144) Single-Supply Operation
*Full 14-Bit Performance Without Adjustments
*Unbuffered Voltage Output Directly Drives 60kΩ Loads
*Power-On Reset Circuit Clears DAC Output to
Code 0 (MAX5141/MAX5143) or Code 8192 (MAX5142/MAX5144)
*Schmitt-Trigger Inputs for Direct Optocoupler Interface
*Asynchronous CLR
*Low 120µA Supply Current
*Fast 1µs Settling Time
*25MHz SPI/QSPI/MICROWIRE-Compatible Serial Interface
*VREF Range Extends to VDD
*+5V (MAX5141/MAX5142) or +3V (MAX5143/MAX5144) Single-Supply Operation
*Full 14-Bit Performance Without Adjustments
*Unbuffered Voltage Output Directly Drives 60kΩ Loads
*Power-On Reset Circuit Clears DAC Output to
Code 0 (MAX5141/MAX5143) or Code 8192 (MAX5142/MAX5144)
*Schmitt-Trigger Inputs for Direct Optocoupler Interface
*Asynchronous CLR
MAX5143 Typical Application
High-Resolution and Gain Adjustment
Industrial Process Control
Automated Test Equipment
Data-Acquisition Systems
Industrial Process Control
Automated Test Equipment
Data-Acquisition Systems
MAX5143 Connection Diagram
MAX5143
PDF/DataSheet Download
- Datasheet: MAX5143
- File Size: 420540 KB
- Manufacturer: Maxim
- Click here to Download
- ·MAX002
- FILTRONIC [Filtronic Compound Semiconductors]
- Optical Communications - Modulator Driver Amplifier
- 42133 KB
- ·MAX038
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038C/D
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038CPP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038CWP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038EPP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038EVKIT
- Maxim
- Evaluation Kit for the MAX038
- 106491 KB
- ·MAX038EWP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
MAX5143 Relative Products
MAX5142EUB+T
IC DAC 14BIT SER/VOLT I/O 10UMAX
MAX5142EUB+
IC DAC 14BIT SER/VOLT I/O 10UMAX
MAX5142EUB
The MAX5142EUB isserial-input, voltage-output, 14-bit digital-to-analog converters (DACs) in tiny µMAX packages, 50% smaller than comparable DACs in an 8-pin SO. They operate from low +3V (MAX5143/ MAX5144) or +5V (MAX5141/MAX5142EUB) single supplies. ...
MAX5142
The MAX5142 isserial-input, voltage-output,14-bit digital-to-analog converters (DACs) in tiny µMAX packages, 50% smaller than comparable DACs in an 8-pin SO. They operate from low +3V (MAX5143/MAX5144) or +5V (MAX5141/MAX5142) single supplies.They pro...
MAX5141EUA+T
IC DAC 14BIT SER/VOLT I/O 8-UMAX
MAX5141EUA+
IC DAC 14BIT SER/VOLT I/O 8-UMAX
Hotspot Suppliers Product
PGA205AU
Price: 7.14-7.62 USD
SOP-16, programmable gain, instrumentation amplifier, ±18V, 2nA
AD7512DIKN
Price: 1-5 USD
protected analog switch, DIP, 17V, 150mA, Low dissipation, TTL/CMOS direct interface
XC3S700A-4FGG484C
Price: 13.5-15.8 USD
IC SPARTAN-3A FPGA 700K 484FBGA - XC3S700A-4FGG484C
SST39VF3201-70-4C-EKE
Price: 2.34-3.13 USD
64 Mbit, Multi-Purpose Flash Plus, TSOP, Fast Erase, Word-Program, 2.7-3.6V
K6T4008V1C-GB70
Price: 0.61-0.82 USD
SOP, 512Kx8 bit, low power, low voltage, CMOS static RAM, TFT, Three state output, 2V
BSM50GD120DN2
Price: 1-1 USD
IGBT Power Module, MODULE, 3-phase full-bridge, 1200 V collector-emitter voltage
NJM3772D2
Price: 1.35-1.5 USD
dual stepper motor driver, DIP-22, 1000mA continuous output current, 0V to 7V
TPA6203A1DGNR
Price: 0.3-1.5 USD
1.25W, mono fully differential amplifier, 8MSOP, 2.5 V ~ 5.5 V, Texas
AT24C512B
Price: 0.1-0.5 USD
Two-wire Serial EEPROM, 512Kbit, 1MHz, 8DIP, 1.8 V ~ 3.6 V, RoHS Compliant
NCV8502D33R2G
Price: 0.65-0.7 USD
Micropower 150 mA, LDO Linear Regulators, 8-SOIC, -15 to 48 V, Thermal Overload
BQ24070RHLR
Price: 0.8-1.2 USD
20-QFN, Li-ion linear charger, –0.3 V to 18 V, Texas Instruments, 3.5 A
MAX3232CDR
Price: 0.46-0.54 USD
SOIC, line driver/ receiver,±15kV
