Purchase MAX608, In-stock MAX608 From SeekIC.


Part Number: MAX608
Description: The MAX608 low-voltage step-up controller operates from a 1.8V to 16.5V input voltage range. Pulse-frequency modulat...


Description: The MAX608 low-voltage step-up controller operates from a 1.8V to 16.5V input voltage range. Pulse-frequency modulat...
The MAX608 low-voltage step-up controller operates from a 1.8V to 16.5V input voltage range. Pulse-frequency modulation (PFM) control provides high efficiency at heavy loads, while using only 85A (typical) when operating with no load. In addition, a logic-controlled shutdown mode reduces supply current to 2A typical. The output voltage is factory-set at 5V or can be adjusted from 3V to 16.5V with an external resistor divider.
The MAX608 is ideal for two- and three-cell batterypowered systems. An operating frequency of up to 300kHz allows use with small surface-mount components.
The MAX608 operates in "bootstrapped" mode only (with the chip supply, OUT, connected to the DC-DC output). For a 12V output without external resistors, or for nonbootstrapped applications (chip supply connected to input voltage), refer to the pin-compatible MAX1771. The MAX608 is available in 8-pin DIP and SO packages.
MAX608
PDF/DataSheet Download








