Purchase MAX8576, In-stock MAX8576 From SeekIC.
Part Number: MAX8576
Description: The MAX8576MAX8579 synchronous PWM buck controllers use a hysteretic voltage-mode control algorithm to...
- Table of contents:
MAX8576
-
Suppliers
DataSheet
General Description
MAX8576 General Description
The MAX8576MAX8579 synchronous PWM buck controllers use a hysteretic voltage-mode control algorithm to achieve a fast transient response without requiring loop compensation. The MAX8576/MAX8577 contain an internal LDO regulator allowing the controllers to function from only one 3V to 28V input supply. The MAX8578/MAX8579 do not contain the internal LDO and require a separate supply to power the IC when the input supply is higher than 5.5V. The MAX8576MAX8579 output voltages are adjustable from 0.6V to 0.9 x VIN at loads up to 15A.
Nominal switching frequency is programmable over the 200kHz to 500kHz range. High-side MOSFET sensing is used for adjustable hiccup current-limit and short-circuit protection. The MAX8576/MAX8578 can start up into a precharged output without pulling the output voltage down. The MAX8577/MAX8579 have startup output overvoltage protection (OVP), and will pull down a precharged output.
MAX8576 Maximum Ratings
IN to GND (MAX8576/MAX8577) ..........................-0.3V to +30V
VL to GND (MAX8576/MAX8577).............................-0.3V to +6V
IN to VL (MAX8576/MAX8577) .............................-0.3V to +30V
VCC to GND (MAX8578/MAX8579) ..........................-0.3V to +6V
SS to GND (MAX8576/MAX8577) ...............-0.3V to (VVL + 0.3)V
SS to GND (MAX8578/MAX8579)...............-0.3V to (VCC + 0.3)V
DL to GND (MAX8576/MAX8577) ...............-0.3V to (VVL + 0.3)V
DL to GND (MAX8578/MAX8579) ..............-0.3V to (VCC + 0.3)V
BST to GND...........................................................-0.3V to +36V
BST to LX................................................................-0.3V to +6V
LX to GND ...................-1V (-2.5V for <50ns Transient) to +30V
DH to LX................................................-0.3V to +(VBST + 0.3)V
FB to GND ..............................................................-0.3V to +6V
EN to GND (MAX8578/MAX8679EUB)......................-0.3V to +6V
OCSET to GND (MAX8576/MAX8677) ........-0.3V to (VIN + 0.3)V
OCSET to GND (MAX8578/MAX8679) ...................-0.3V to +30V
OCSET to LX (MAX8576/MAX8677) ...........-0.6V to (VIN + 0.3)V
OCSET to LX (MAX8578/MAX8679).......................-0.6V to +30V
DH and DL Continuous Current ............................±250mA RMS
Continuous Power Dissipation (TA = +70°C)
10-Pin MAX (derate 5.6mW/°C above +70°C) .........444mW
Operating Temperature Range ........................-40°C to +85°C
Junction Temperature.....................................................+150°C
Storage Temperature Range ..........................-65°C to +150°C
Lead Temperature (soldering, 10s) ................................+300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
MAX8576 Features
· 3V to 28V Supply Voltage Range
· 1.2% Accurate Over Temperature
· Adjustable Output Voltage Down to 0.6V
· 200kHz to 500kHz Switching Frequency
· Adjustable Temperature-Compensated Hiccup Current Limit
· Lossless Peak Current Sensing
· Monotonic Startup into Prebias Output (MAX8576/MAX8578)
· Startup Overvoltage Protection (MAX8577/MAX8579)
· Enable/Shutdown
· Adjustable Soft-Start
· 1.2% Accurate Over Temperature
· Adjustable Output Voltage Down to 0.6V
· 200kHz to 500kHz Switching Frequency
· Adjustable Temperature-Compensated Hiccup Current Limit
· Lossless Peak Current Sensing
· Monotonic Startup into Prebias Output (MAX8576/MAX8578)
· Startup Overvoltage Protection (MAX8577/MAX8579)
· Enable/Shutdown
· Adjustable Soft-Start
MAX8576 Typical Application
·Motherboard Power Supplies
·AGP and PCI-Express Power Supplies
·Graphic-Card Power Supplies
·Set-Top Boxes
·Point-of-Load Power Supplies
·AGP and PCI-Express Power Supplies
·Graphic-Card Power Supplies
·Set-Top Boxes
·Point-of-Load Power Supplies
MAX8576 Connection Diagram
MAX8576
PDF/DataSheet Download
- Datasheet: MAX8576
- File Size: 221184 KB
- Manufacturer: MAXIM
- Click here to Download
- ·MAX002
- FILTRONIC [Filtronic Compound Semiconductors]
- Optical Communications - Modulator Driver Amplifier
- 42133 KB
- ·MAX038
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038C/D
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038CPP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038CWP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038EPP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
- ·MAX038EVKIT
- Maxim
- Evaluation Kit for the MAX038
- 106491 KB
- ·MAX038EWP
- MAXIM [Maxim Integrated Products]
- High-Frequency Waveform Generator
- 207992 KB
MAX8576 Relative Products
MAX8575EUT+T
IC CONV LCD BOOST SOT23-6
MAX8575
The MAX8575 LCD step-up converters uses an internal n-channel switch and an internal p-channel output isolation switch. These converters operate from a 2.7V to 5.5V supply voltage and deliver up to 28V at the output.A unique control scheme of MAX8575 provide...
MAX8574EUT+T
IC CONV LCD BOOST SOT23-6
MAX8574
The MAX8574 LCD step-up converters uses an internal n-channel switch and an internal p-channel output isolation switch. These converters operate from a 2.7V to 5.5V supply voltage and deliver up to 28V at the output.A unique control scheme of MAX8574 provide...
-
MAX8573EUT+T
IC CONV LCD BOOST SOT23-6
MAX8573
The MAX8573 LCD step-up converters uses an internal n-channel switch and an internal p-channel output isolation switch. These converters operate from a 2.7V to 5.5V supply voltage and deliver up to 28V at the output.A unique control scheme of MAX8573 provide...
Hotspot Suppliers Product
TN2-5V
Price: 0.6-0.67 USD
slim polarized relay, Surge voltage withstand, 1500V, Small header area, 140mW, DIP-10PIN
SN74HC245N
Price: 0.15-0.22 USD
octal BUS transceiver, 3-state outputs, DIP-20, ±35 mA, 5 V, Low Input Current
SAA5040B
Price: 1.27-1.55 USD
Shortform Data and Cross References Philips SAA5040B
CY7C342B-25HC
Price: 8.4-14.6 USD
EPLD, PLCC, -25 to 25mA
MG150J2YS1
Price: 22-30 USD
Silicon N Channel IGBT, 600V, 150A, 780W, MG150J2YS1, Toshiba Semiconductor
HAS400-S
Price: 13.5-15 USD
Current Transducer, ± 15 V, Hall effect
LT1790BIS6-2.5#TRPBF
Price: 0.8-1 USD
SOT-23, low dropout reference, 2.5V, 5mA, RoHS Compliant, LT1790BIS6-2.5#TRPBF
BT8370KPF
Price: 5-6 USD
Circuits, BT8370KPF, QFP, Two-frame transmit, Parallel 8-bit microprocessor
SNJ54LS138J
Price: 3-4 USD
decoder/demultiplexer, DIP, 7V
HD64F3048F16
Price: 2.8-4.5 USD
100QFP, 128KB, microcontroller, 8MHz, 4.5 V ~ 5.5 V, RoHS Non-Compliant
LM2596T-ADJ
Price: 0.5-1.8 USD
TO-263, Step-Down, Switching Regulator, 150Khz, TTL Shutdown Capability, Wide Input Voltage Range
PC929
Price: 1.45-1.94 USD
Shortcircuit Protector Circuit, SOP16, 20mA, 500mW, 35V, High speed response, High isolation voltage
