Purchase MAX881R, In-stock MAX881R From SeekIC.
MFG:MAX D/C:0011+


Part Number: MAX881R
MFG: MAX
D/C: 0011+
Description: The MAX881R low-noise, inverting power supply is designed for biasing GaAsFET power amplifiers in port...
MFG:MAX D/C:0011+


MFG: MAX
D/C: 0011+
Description: The MAX881R low-noise, inverting power supply is designed for biasing GaAsFET power amplifiers in port...
The MAX881R low-noise, inverting power supply is designed for biasing GaAsFET power amplifiers in portable wireless applications. This device is a chargepump inverter followed by a negative linear regulator. The input voltage range is 2.5V to 5.5V. The output is preset at -2.0V or can be set, using two resistors, to any voltage from -0.5V to (-VIN + 0.6V). It can deliver up to 4mA. The internal linear regulator also filters the output to 1mVp-p ripple and noise.
Other features include a power-OK (POK ) output that signals when the negative voltage is within 7.5% of its set point. It protects the GaAsFET by not allowing power to be applied to the GaAsFET's drain until it is properly biased. The signal can be routed either to a microcontroller or directly to a switch at the GaAsFET drain. The MAX881R is available in a space-saving 10-pin MAX package.
| IN to GND | -3V to +6V |
| SHDN to GND | -3V to +6V |
| POK to GND | -0.3V to +12V |
| C1+ to GND | -0.3V to (VIN + 0.3V) |
| C1-, NEGOUT, OUT, FB to GND | -6V to (VIN + 0.3V) |
| Continuous Power Dissipation (TA = +70) 10-pin MAX (derate 4.1mW/ above +70) |
444mW |
| Operating Temperature Range | -40 to +85 |
| Junction Temperature | +150 |
| Storage Temperature Range | -65 to +165 |
| Lead Temperature (soldering, 10s) | +300 |
Note 1: The output may be shorted to NEGOUT or GND if the package power dissipation is not exceeded. Typical short-circuit current is 35mA.
MAX881R
PDF/DataSheet Download








