MAX9207EAI

The MAX9207EAI is transform 10-bitwide parallel LVCMOS/LVTTL data into a serial highspeed bus low-voltage differential signaling (LVDS) data stream.The serializers MAX9207EAI typically pair with deserializers like the MAX9206*/MAX9208*, which receive the serial output and transform it back to 10-bit-wide parallel data.

Features of the MAX9207EAI are:(1)standalone serializer (vs. SERDES) ideal for unidirectional links;(2)framing bits for deserializer resync allow hot insertion without system interruption;(3)LVDS serial output rated for point-to-point and bus applications;(4)wide reference clock input range is 40MHz to 66MHz;(5)low 140ps (pk-pk) deterministic jitter;(6)10-bit parallel LVCMOS/LVTTL interface;(7)up to 660Mbps payload data rate;(8)programmable active edge on input latch;(9)pin-compatible upgrades to DS92LV1021 and DS92LV1023.

The absolute maximum ratings of the MAX9207EAI can be summarized as:(1):the parameter is VCC to GND,the rating is -0.3 to +4.0,the unit is V;(2):the parameter is IN_,SYNC1,SYNC2,EN,TCLK_R/F, TCLK,PWRDN to GND,the rating is -0.3 to VCC+0.3,the unit is V;(3):the parameter is OUT+, OUT- to GND,the rating is -0.3 to +4.0,the unit is V;(4):the parameter is output short-circuit duration,the rating is continous;(5):the parameter is continuous power dissipation (TA=+70) 28-Pin SSOP (derate 9.5mW/ above +70),the rating is 762,the unit is mW;(6):the parameter is storage temperature range,the rating is -65 to +150,the unit is ;(7):the parameter is junction temperature,the rating is +150,the unit is ;(8):the parameter is operating temperature range,the rating is -40 to +85,the unit is ;(9):the parameter is lead temperature (soldering,10s),the rating is +300,the unit is ;(10):the parameter is ESD protection (human body model, OUT+, OUT-),the rating is ±8,the unit is kV.