Purchase MAX961-MAX964, In-stock MAX961-MAX964 From SeekIC.


Part Number: MAX961-MAX964
Description: The MAX961MAX964/MAX997/MAX999 are low-power, ultra-high-speed comparators with internal hysteresis. T...


Description: The MAX961MAX964/MAX997/MAX999 are low-power, ultra-high-speed comparators with internal hysteresis. T...
The MAX961MAX964/MAX997/MAX999 are low-power, ultra-high-speed comparators with internal hysteresis. These devices are optimized for single +3V or +5V operation. The input common-mode range extends 100mV Beyond-the-Rails™, and the outputs can sink or source 4mA to within 0.52V of GND and VCC. Propagation delay is 4.5ns (5mV overdrive), while supply current is 5mA per comparator.
The MAX961/MAX963/MAX964 and MAX997 have a shutdown mode in which they consume only 270A supply current per comparator. The MAX961/MAX963 provide complementary outputs and a latch-enable feature.
Latch enable allows the user to hold a valid comparator output. The MAX999 is available in a tiny SOT23-5 package. The single MAX961/MAX997 and dual MAX962 are available in space-saving 8-pin MAX® packages
Supply Voltage, VCC to GND...................................-0.3V to +6V
All Other Pins.............................................-0.3V to (VCC + 0.3V)
Current into Input Pins ...................................................±20mA
Duration of Output Short Circuit to GND or VCC .......Continuous
Continuous Power Dissipation (TA = +70°C)
5-Pin SOT23 (derate 7.1mW/°C above +70°C).......571mW/°C
8-Pin SO (derate 5.88mW/°C above +70°C)...........471mW/°C
8-Pin MAX (derate 4.10mW/°C above +70°C) ......330mW/°C
14-Pin SO (derate 8.33mW/°C above +70°C).........667mW/°C
16-Pin SO (derate 8.70mW/°C above +70°C).........696mW/°C
16-Pin QSOP (derate 8.33mW/°C above +70°C)....667mW/°C
Operating Temperature Range
MAX96_E/MAX99_E........................................ .-40°C to +85°C
Storage Temperature Range ......................... -65°C to +160°C
Lead Temperature (soldering, 10s) ................................+300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
MAX002
PDF/DataSheet Download








