MAX9686MJA

The MAX9686MJA is designed as very fast TTL comparator manufactured with a high frequency bipolar process (fT=6GHz) that are capable of very short propagation delays, yet maintain the excellent DC matching characteristics that are normally found only in slower comparators.

It has six features. (1)6ns propagation delay. (2)2ns latch set-up time. (3)+5V, -5.2V power supplies. (4)Pin-compatible to LT1016, Am686. (5)Available in commercial and military versions. (6)Available in small outline. Those are all the main features.

Some absolute maximum ratings have been concluded into several points as follow. (1)Its supply voltage would be +/-6V. (2)Its power dissipation would be 336mW. (3)Its input voltages would be +/-5V. (4)Its differential input voltages would be 3.5V. (5)Its output current would be 20mA. (6)Its operating temperature range would be from -55°C to 125°C. (7)Its storage temperature range would be from -55°C to 150°C. (8)Its lead temperature soldering 10 seconds would be 300°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics are concluded as follow. (1)Its input offset voltage would be min -3mV and max +3mV. (2)Its temperature coefficient would be typ 4uV/°C. (3)Its input offset current would be max 5.0uA. (4)Its input bis current would be max 25uA. (5)Its common mode rejection ratio would be min 80dB and typ 96dB. (6)Its power supply rejection ratio would be min 70dB and typ 85dB. (7)Its input voltage range would be min -3V and max +3V. (8)Its latch high input voltage would be min 2.0V. (9)Its latch low input voltage would be max 0.8V. (10)Its latch low input current would be max -750uA. (11)Its I/O logic level output high voltage would be min 2.4V and typ 3.0V. (12)Its output low voltage would be max 0.5V. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!