Purchase MB90234, In-stock MB90234 From SeekIC.
Part Number: MB90234
Description: The MB90230 series is a member of general-purpose, 16-bit microcontrollers designed for those applicat...
- Table of contents:
MB90234
-
Suppliers
DataSheet
General Description
MB90234 General Description
The MB90230 series is a member of general-purpose, 16-bit microcontrollers designed for those applications which require high-speed realtimeprocessing, proving to be suitable for various industrial machines, camera and video devices, OA equipment, and for process control. The CPU used in this series is the F2MC*-16F. The instruction set for the F2MC-16F CPU core is designed to be optimized for controller applications while inheriting the AT architecture of the F2MC-16/16H series, allowing a wide range of control tasks to be processed efficiently at high speed.
The peripheral resources integrated in the MB90230 series include: the UART (clock asynchronous/synchronous transfer) × 1 channel, the extended serial I/O interface ×1 channel, the A/D converter (8/10-bit precision) ×8 channels, the D/A converter (8-bit precision) ×2 channels, the level comparator ×1 channel, the external interrupt input ×4 lines, the 8-bit PPG timer (PWM/single-shot function) × 1 channel, the 8-bit PWM controller × 6 channels, the 16-bit free run timer × 1 channel, the input capture unit ×4 channels, the output compare unit ×6 channels, and the serial E2PROM interface.
*: F2MC stands for FUJITSU Flexible Microcontroller.
MB90234 Maximum Ratings
(VSS = 0.0 V)
*1: AVRH, AVRL, or AVCC must not exceed VCC.
AVSS and AVRH must not exceed AVRH and AVCC, respectively.
VCC AVCC AVRH > AVRL AVSS VSS
*2: VI or VO must not exceed "VCC + 0.3 V."
WARNING: Permanent device damage may occur if the above "Absolute Maximum Ratings" are exceeded.
Functional operation should be restricted to the conditions as detailed in the operational sections of
this data sheet. Exposure to absolute maximum rating conditions for externded periods may affect
device reliability.
| Parameter | Symbol | Value | Unit | Remarks | |
| Min. | Max. | ||||
| Power supply voltage | VCC | VSS 0.3 | VSS + 7.0 | V | |
| AVCC, AVSS AVRH, AVRL |
VCC 0.3*1 | VSS + 7.0 | V | ||
| Input voltage | VI*2 | VSS 0.3 | VCC + 0.3 | V | |
| Output voltage | VO*2 | VSS 0.3 | VCC + 0.3 | V | |
| "L" level output current | IOL | - | 20 | mA | |
| "L" level average output current | IOLAV | - | 4 | mA | |
| "L" level total output current | IOL | - | 50 | mA | |
| "H" level output current | IOH | - | 10 | mA | |
| "H" level average output current | IOHAV | - | 4 | mA | |
| "H" level total output current | IOH | - | 50 | mA | |
| Power consumption | PD | - | 400 | mW | |
| Operating temperature | TA | 40 | +70 | °C | |
| Storage temperature | Tstg | 55 | +125 | °C | |
AVSS and AVRH must not exceed AVRH and AVCC, respectively.
VCC AVCC AVRH > AVRL AVSS VSS
*2: VI or VO must not exceed "VCC + 0.3 V."
WARNING: Permanent device damage may occur if the above "Absolute Maximum Ratings" are exceeded.
Functional operation should be restricted to the conditions as detailed in the operational sections of
this data sheet. Exposure to absolute maximum rating conditions for externded periods may affect
device reliability.
MB90234 Features
F2MC-16F CPU block
• Minimum execution time: 62.5 ns (at machine clock frequency of 16 MHz)
• Instruction set optimized for controllers
Various data types supported (bit, byte, word, and long-word)
Extended addressing modes: 23 types
High coding efficiency
Higher-precision operation enhanced by a 32-bit accumulator
Signed multiplication and division instructions
• Enhanced instructions applicable to high-level language (C) and multitasking
System stack pointer
Enhanced pointer-indirect instructions
Barrel shift instructions
• Increased execution speed: 8-byte instruction queue
• 8-level, 32-factor powerful interrupt service functions
• Automatic transfer function independent of the CPU (EI2OS)
• General-purpose ports: Up to 84 lines
Ports with input pull-up resistor available: 24 lines
Ports with output open-drain available: 9 lines
Peripheral blocks
• ROM:48 Kbytes (MB90233)
96 Kbytes (MB90234)
EPROM: 96 Kbytes (MB90W234)
One-time PROM: 96 Kbytes (MB90P234)
• RAM: 2 Kbytes (MB90233)
3 Kbytes (MB90234/W234/P234)
• PWM control circuit: (simple 8 bits): 6 channels
• Serial interface
UART: 1 channel
Extended serial I/O interface
Switchable I/O port: 1 channel
Communication prescaler (Source clock generator for the UART, serial I/O interface, CKOT, and level
comparator): 1 channel
• Serial E2PROM interface: 1 channel
• A/D converter with 8/10-bit resolution: input 8 channels
• Level comparator: 1 channel
4-bit D/A converter integrated
• D/A converter with 8-bit resolution: 2 channels
8-bit PPG timer: 1 channel
• Input/output timer
16-bit free run timer: 1 channel
16-bit output compare unit: 6 channels
16-bit input capture unit: 4 channels
• 18-bit timebase timer
• Watchdog timer function
• Standby modes
Sleep mode
Stop mode
• Minimum execution time: 62.5 ns (at machine clock frequency of 16 MHz)
• Instruction set optimized for controllers
Various data types supported (bit, byte, word, and long-word)
Extended addressing modes: 23 types
High coding efficiency
Higher-precision operation enhanced by a 32-bit accumulator
Signed multiplication and division instructions
• Enhanced instructions applicable to high-level language (C) and multitasking
System stack pointer
Enhanced pointer-indirect instructions
Barrel shift instructions
• Increased execution speed: 8-byte instruction queue
• 8-level, 32-factor powerful interrupt service functions
• Automatic transfer function independent of the CPU (EI2OS)
• General-purpose ports: Up to 84 lines
Ports with input pull-up resistor available: 24 lines
Ports with output open-drain available: 9 lines
Peripheral blocks
• ROM:48 Kbytes (MB90233)
96 Kbytes (MB90234)
EPROM: 96 Kbytes (MB90W234)
One-time PROM: 96 Kbytes (MB90P234)
• RAM: 2 Kbytes (MB90233)
3 Kbytes (MB90234/W234/P234)
• PWM control circuit: (simple 8 bits): 6 channels
• Serial interface
UART: 1 channel
Extended serial I/O interface
Switchable I/O port: 1 channel
Communication prescaler (Source clock generator for the UART, serial I/O interface, CKOT, and level
comparator): 1 channel
• Serial E2PROM interface: 1 channel
• A/D converter with 8/10-bit resolution: input 8 channels
• Level comparator: 1 channel
4-bit D/A converter integrated
• D/A converter with 8-bit resolution: 2 channels
8-bit PPG timer: 1 channel
• Input/output timer
16-bit free run timer: 1 channel
16-bit output compare unit: 6 channels
16-bit input capture unit: 4 channels
• 18-bit timebase timer
• Watchdog timer function
• Standby modes
Sleep mode
Stop mode
MB90234 Connection Diagram
MB90234
PDF/DataSheet Download
- Datasheet: MB90234
- File Size: 1744034 KB
- Manufacturer: Fujitsu
- Click here to Download
- ·MB90050
- FUJITSU [Fujitsu Media Devices Limited]
- On-Screen Display Controller
- 760910 KB
- ·MB90050PF
- FUJITSU [Fujitsu Media Devices Limited]
- On-Screen Display Controller
- 760910 KB
- ·MB90075
- FUJITSU [Fujitsu Media Devices Limited]
- ON-SCRREN DISPLAY CONTROLLER FOR NTSC/PAL
- 1988428 KB
- ·MB90075-PF
- FUJITSU [Fujitsu Media Devices Limited]
- ON-SCRREN DISPLAY CONTROLLER FOR NTSC/PAL
- 1988428 KB
- ·MB90075-P-SH
- FUJITSU [Fujitsu Media Devices Limited]
- ON-SCRREN DISPLAY CONTROLLER FOR NTSC/PAL
- 1988428 KB
- ·MB90089-PF
- FUJITSU [Fujitsu Media Devices Limited]
- ON-SCREEN DISPLAY CONTROLLER
- 2390199 KB
- ·MB90091
- FUJITSU [Fujitsu Media Devices Limited]
- Intelligent On-screen Display Controller (IOSDC)
- 416577 KB
- ·MB90091A
- FUJITSU [Fujitsu Media Devices Limited]
- Intelligent On-screen Display Controller (IOSDC)
- 416577 KB
MB90234 Relative Products
MB90233
The MB90233 series is a member of general-purpose, 16-bit microcontrollers designed for those applications which require high-speed realtimeprocessing, proving to be suitable for various industrial machines, camera and video devices, OA equipment, and for pr...
MB90230
The MB90230 is designed as the general-purpose, 16-bit microcontroller that can be used in various industrial machines, camera and video devices, OA equipment, and for process control. The instruction set for the F2MC-16F CPU core is designed to be optimized...
MB90224
MB90223
MB90214
MB90099
The MB90099 is an on-screen display controller for displaying text and graphics on the TV screen. The threechannel output control function, compact package and low voltage operation make this device suitable for onscreen displays in portable devices includin...
Hotspot Suppliers Product
OPA177GS
Price: 1-4 USD
precision bipolar op amp, SOP8, ±22V, low offset voltage, low drift
LMG5278XUFC-00T
Price: 0.1-1 USD
LMG5278XUFC-00T, hit 9.4", 640*480 STN LCD Panel
TLV2631IDBVT
Price: 0.27-0.28 USD
wide bandwidth operational amplifiers, 9MHZ, SOT23-5, 6 V, ± 10 mA
DS5250FP-125
Price: 1-100 USD
High-Speed Secure Microcontroller QFP100 Dallas
PCVA-E242
Price: 1-5 USD
PCVA-E242, PLCC, Interconnect Cooperation, Integrated Circuits
NF-6100-N-A2
Price: 6.5-7 USD
NF-6100-N-A2, BGA, NVIDIA Corporation
113F3
Price: 30-50 USD
Power Module, High reliability, Low profile
DD600S16K4
Price: 1-2 USD
european power semiconductor, 1600 V, 1200 A, 50 Hz
SN74LS138DR
Price: 0.1-0.5 USD
8-line decoder/demultiplexer, SOP, 7V
AV25-48S05
Price: 1-1 USD
Isolated and Regulated, 25W, Modular DC/DC Converter, 48VDC, Wide 2:1 Input Range
PSKAV145
Price: 1-2 USD
Slow Blow Fuse, PSKAV145, Adelong Electronics, Circuit Protection, 1A, 250V
ST62T10B6
Price: 1.05-1.15 USD
8-bit OTP/EPROM MCU, DIP20, 8MHz maximum clock frequency, 5 interrupt vectors
