MC33592FTA

The MC33592FTA is designed as PLL tuned UHF receiver for data transfer applications.

It has many features. The first one is 315MHz, 434MHz bands. The second one is OOK demodulation. The third one is low current consumption is 5mA typ in run mode. The fourth one is internal or external strobing. The fifth one is fast wake-up time (1ms). The sixth one is -105dBm RF sensitivity (at 4.8kBd data rate). The seventh one is fully integrated VCO. The eighth one is image cancelling mixer. The ninth one is integrated IF bandpass filter at 660kHz. The tenth one is IF bandwidth is 300kHz. The eleventh one is ID byte and tone detection. The twelfth one is data rate is from 1 to 11kBd. The thirteenth one is manchester coded data clock recovery. The fourteenth one is fully configurable by SPI interface. The last one is few external components, no RF adjustment. That are all the main features.

Some absolute maximum ratings have been concluded into several points as follow. The first one is about its supply voltage which would be from Vgnd-0.3 to 5.5V. The second one is about its voltage allowed on each pin which would be from Vgnd - 0.3 to Vcc + 0.3V. The third one is about its ESD HBM voltage capability on each pin which would be ±2000V. The fourth one is about its ESD MM voltage capability on each pin which would be ±200V. The fifth one is about its solder heat resistance test (10 s) which would be 260°C. The sixth one is about its storage temperature which would be from -65°C to +150°C. The seventh one is about its junction temperature which would be 150°C.

Also some electrical characteristics about it. The first one is about its mean supply current which would be typ 815uA and max 1100uA. The second one is about its supply current run & configuration modes which would be typ 5.7mA and max 7.4mA. The third one is about its supply current in sleep mode which would be typ 115uA and max 250uA for strobe oscillator enabled and would be typ 90uA and max 200uA for strobe oscillator disable. And so on. For more information please contact us.