Purchase MC44BC374T1, In-stock MC44BC374T1 From SeekIC.


Part Number: MC44BC374T1
Description: The channel is set by an on-chip high-speed I2C compatible bus receiver. A Phase-Locked Loop (PLL) tun...


Description: The channel is set by an on-chip high-speed I2C compatible bus receiver. A Phase-Locked Loop (PLL) tun...
The channel is set by an on-chip high-speed I2C compatible bus receiver. A Phase-Locked Loop (PLL) tunes the modulator over the full UHF range. The modulator incorporates a sound subcarrier oscillator and uses a second PLL to derive 4.5, 5.5, 6.0, and 6.5MHz subcarrier frequencies. These frequencies are selectable using the bus.
The modulation standard is set to System B/G.
The picture-to-sound ratio is adjusted using the bus. In addition, an on-chip video test pattern generator can be turned ON with a 1KHz audio test signal.
Compared with the MC44BC374C, this modulator has one IIC programming difference, a hardware standby mode in addition to the software standby mode, and no logic output port.
Compared with the MC44BC374T, this modulator has a different start-up channel.
|
Sym |
Parameter |
Value |
Unit |
|
Vcc |
Supply voltage |
6 |
V |
|
Tamin |
Minimum operating ambient temperature |
20 |
|
|
Tamax |
Maximum operating ambient temperature |
85 |
|
|
Tstgmin |
Minimum storage temperature |
65 |
|
|
Tstgmax |
Maximum storage temperature |
150 |
|
|
Tj |
Junction Temperature |
150 |
MC44BC374T1
PDF/DataSheet Download








