Operating Temperature Range
:
Core
: S08
Processor Series
: MC9S08
Data Bus Width
: 8 bit
On-Chip ADC
: Yes
Maximum Clock Frequency
: 20 MHz
Mounting Style
: SMD/SMT
Data RAM Size
: 4 KB
Program Memory Size
: 60 KB
Package / Case
: LQFP-64
Operating Supply Voltage
: 2.5 V, 3.3 V
DescriptionThe MC9S08GB60ACFUE is one member of the MC9S08GB60 series.Typically, application systems have two separate capacitors across the power pins. In this case,there should be a bulk electrolytic capacitor,such as a 10-F tantalum capacitor,to provide bulk charge storage for the overall system and a 0.1-F ceramic bypass capacitor located as close to the MCU power pins as practical to suppress high-frequency noise.
Features of the MC9S08GB60ACFUE are:(1)8-channel, 10-bit analog-to-digital converter (ATD); (2)Two serial communications interface modules (SCI); (3)Serial peripheral interface module (SPI); (4)Inter-integrated circuit bus module to operate up to 100 kbps(IIC); (5)One 3-channel and one 5-channel 16-bit timer/pulse width modulator (TPM) modules with selectable input capture,output compare,and edge-aligned PWM capability on each channel.Each timer module may be configured for buffered, centered PWM (CPWM) on all channels (TPMx); (6)8-pin keyboard interrupt module (KBI); (7)16 high-current pins (limited by package dissipation); (8)Software selectable pullups on ports when used as input.Selection is on an individual port bit basis.During output mode, pullups are disengaged.
The absolute maximum ratings of the MC9S08GB60ACFUE can be summarized as:(1)supply voltage:-0.3 to +3.8V;(2)storage temperature range:-55 to 150;(3)maximum current into VDD:120mA;(4)digital input voltage:-0.3 to Vdd+0.3V;(5)instantaneous maximum current:±25 mA.Write a data value to an address in the FLASH array. The address and data information from this write is latched into the FLASH interface. This write is a required first step in any command sequence. For erase and blank check commands, the value of the data is not important. For page erasecommands,the address may be anya ddress in the 512-byte page of FLASH to be erased.For mass erase and blank check commands, the address can be any address in the FLASH memory.Whole pages of 512bytes are the smallest blocks of FLASH that may be erased. In the 60K version,there are two instances where the size of a block that is accessible to the user is less than 512 bytes:the first page following RAM,and the first page following the high page registers.These pages are overlapped by the RAM and high page registers, respectively.
Parameters: | Technical/Catalog Information | MC9S08GB60ACFUE |
| Vendor | Freescale Semiconductor |
| Category | Integrated Circuits (ICs) |
| Program Memory Size | 60KB (60K x 8) |
| RAM Size | 4K x 8 |
| Number of I /O | 56 |
| Package / Case | 64-LQFP |
| Speed | 20MHz |
| Controller Series | HCS08 |
| Oscillator Type | Internal |
| Packaging | Tray |
| Program Memory Type | FLASH |
| EEPROM Size | - |
| Core Processor | HCS08 |
| Data Converters | A/D 8x10b |
| Core Size | 8-Bit |
| Operating Temperature | -40°C ~ 85°C |
| Connectivity | I²C, SCI, SPI |
| Peripherals | LVD, POR, PWM, WDT |
| Voltage - Supply (Vcc/Vdd) | 1.8 V ~ 3.6 V |
| Drawing Number | 375; 840F-02; FU; 64 |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | MC9S08GB60ACFUE
MC9S08GB60ACFUE
|
MC9S08GB60ACFUE Data Sheet
