MCH100H604

Features:

•Differential 50ΩECL Outputs
•Choice Between Differential ECL or TTL Clock Input
•Dual Power Supply
•Multiple Power and Ground Pins to Minimize Noise
•Specified WithinDevice Skew


Pinout




Specifications

100H ECL DC CHARACTERISTICS: VCCT= +5.0 V ±10%; VEE= 5.20 V ±5%
Symbol	Parameter	0°C		25°C		85°C		Unit	Condition
		Min	Max	Min	Max	Min	Max
IIH IIL	Input HIGH Current Input LOW Current	0.5	225	0.5	145	0.5	145	µA µA
VIH VIL	Input HIGH Voltage Input LOW Voltage	1165 1810	880 1475	1165 1810	880 1475	1165 1810	880 1475	mV
VBB	Output Bias Voltage	1400	1280	1400	1280	1400	1280	mV
VOH VOL	Output HIGH Voltage Output LOW Voltage	1025 1810	880 1620	1025 1810	880 1620	1025 1810	880 1620	mV	50Ωto2.0V

Description

  The MCH100H604 is a 6bit, registered, dual supply TTL to ECL translator.  The device features differential ECL outputs as well as a choice  between either a differential ECL clock input or a TTL clock input.  The asynchronous master reset control is an ECL level input..

  With its differential ECL outputs and TTL inputs the MCH100H604 device is ideally suited for the transmit function of a HPPI bus type boardtoboard interface application.  The on chip registers simplify the task of synchronizing the data between the two boards.

  The MCH100H604 is available in either ECL standard: the 10H device is compatible with MECL 10KH logic levels while the 100H device is  compatible with 100K logic levels.